- Under-Seat Fit - Chevy/GMC Crew Cabs (2007–2026) / Ford F-150/Super Duty Crew Cabs (2009–2026)
- Quad 8" High-Output Subwoofers - 600W RMS / 1200W MAX power
- Heavy-Duty MDF Enclosure
- FRP-2.5K Amplifier Included
- Complete Ready-to-Install Package
- Back Up Camera
- Surface Mount ~ Front or Rear
- High Resolution / Low Illumination
- Full Color, Parking Guide
- AHD / CVBS Systems
- Water Proof IP68
- Loaded Front Kick Panel Enclosure
- OEM Fit ~ 2015 to Current Except R Series
- 1 X NXL-IQ6/BK ~ 6.5" Speaker(each)
- 1 X PRO-TW1LD ~ 3.8" Tweeter(each)
- Digital LED Lights ~ Pair (L&R)
- Water Resistant IP65 ~ Black
- Loaded Front Kick Panel Enclosure
- OEM Fit ~ 2015 to Current Except R Series
- 1 X NXL-IQ6/BK ~ 6.5" Speaker(each)
- 1 X PRO-TW1LD ~ 3.8" Tweeter(each)
- Digital LED Lights ~ Pair (L&R)
- Water Resistant IP65 ~ Black
- Empty Kick Panel Enclosure
- OEM Fit ~ 2015 to Current
- 1 X 6.5" Speaker & 1 X 3.78" Tweeter(each)
- Digital RGB LED Lights
- Pair (L&R) ~ Installation Hardware Included
- Water Resistant IP65 ~ Black
- 1" Compression Driver
- RMS Power: 160 Watts(320 Watts Peak)
- Impedance: 8 Ohm ~ 109db
- Neodymium Magnet - Composite Polymide Diaphragm
- Twist On
- Easily Repaired With The PRO-DRNSC1.5VC
- Loudspeaker Horn Diffuser Horn
- 6.5"
- Bolt on Installation
- Mounting Hardware Included
- Black ABS
- 1 male to 2 female RCA splitter for clean signal distribution
- 100% OFC wiring for clear, low-loss audio
- Ultra Flex jacket for easy installation
- Lightweight, secure copper-clad connectors
- 10 pack ideal for system builds and upgrades
- RCA Y Connector
- 1 Male 2 Female
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Black/Red
- 1 male to 2 female RCA splitter for clean signal distribution
- 100% OFC wiring for clear, low-loss audio
- Ultra Flex jacket for easy installation
- Lightweight, secure copper-clad connectors
- 10 pack ideal for system builds and upgrades
- 8" Mid-Range
- MAX Power: 800 Watts
- RMS Power: 400 Watts
- Impedance: 8-Ohm
- Ferrite Magnet
- 99dB
- 6.5" Mid-Range
- MAX Power: 600 Watts
- RMS Power: 300 Watts
- Impedance: 8-Ohm
- Ferrite Magnet
- 97dB
- 8" Mid-Range
- MAX Power: 800 Watts
- RMS Power: 400 Watts
- Impedance: 8-Ohm
- Ferrite Magnet
- 99dB
- 10" Mid-Range
- MAX Power: 1400 Watts
- RMS Power: 700 Watts
- Impedance: 8-Ohm
- Ferrite Magnet
- 98dB
- 12" Mid-Range
- MAX Power: 1500 Watts
- RMS Power: 750 Watts
- Impedance: 8-Ohm
- Ferrite Magnet
- 98.7dB
Sold out
- 6.5" Mid-Range
- MAX Power: 600 Watts
- RMS Power: 300 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 97dB
Sold out
- 8" Mid-Range
- MAX Power: 800 Watts
- RMS Power: 400 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 99dB
- 10" Mid-Range
- MAX Power: 1400 Watts
- RMS Power: 700 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 98dB
Sold out
- 12" Mid-Range
- MAX Power: 1500 Watts
- RMS Power: 750 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 98.7dB
- Roll Cage Tower Sound Bar System
- 2 x 6.5" PRO-HY6.4B
- RMS Power: 2 x 225 Watts ~ 98dB
- Impedance: 4 + 4 Ohm
- Ferrite & Neodymium Magnets
- RGB LED Lights ~ Water Resistant IP65
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 5000 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- Full-Range Class D Monoblock
- 1,500W RMS at 1 Ohm
- Compact High-Power Design
- Smart Cooling System
- Remote Level Control
- Clip, Short Circuit, and Overload Protection
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 2500 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 3500 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 5000 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- Full-Range Class D Monoblock
- 12,000W RMS at 1 Ohm
- Compact High-Power Design
- Smart Cooling System
- Remote Level Control
- Clip, Short Circuit, and Overload Protection
- Full-Range Class D Monoblock
- 1,500W RMS at 1 Ohm
- Compact High-Power Design
- Smart Cooling System
- Remote Level Control
- Clip, Short Circuit, and Overload Protection
- Full-Range Class D Monoblock
- 1,500W RMS at 1 Ohm
- Compact High-Power Design
- Smart Cooling System
- Remote Level Control
- Clip, Short Circuit, and Overload Protection
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 2500 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 2500 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 3500 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 3500 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 5000 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 X 5000 Watts RMS @ 1 Ohm
- Clip / Protection Indicator
- Remote Level Control Knob
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- Full-Range Class D Monoblock
- 12,000W RMS at 1 Ohm
- Compact High-Power Design
- Smart Cooling System
- Remote Level Control
- Clip, Short Circuit, and Overload Protection
- Full-Range Class D Monoblock
- 12,000W RMS at 1 Ohm
- Compact High-Power Design
- Smart Cooling System
- Remote Level Control
- Clip, Short Circuit, and Overload Protection
- RMS Power: 4 x 400W @ 4Ω, 4 x 700W @ 2Ω, 4 x 1000W @ 1Ω
- Bridged Power: 2 x 1200W @ 4Ω | 2 x 1800W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 120W @ 4Ω, 4 x 200W @ 2Ω, 4 x 300W @ 1Ω
- Bridged Power: 2 x 350W @ 4Ω | 2 x 500W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 250W @ 4Ω, 4 x 400W @ 2Ω, 4 x 600W @ 1Ω
- Bridged Power: 2 x 750W @ 4Ω | 2 x 1000W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 400W @ 4Ω, 4 x 700W @ 2Ω, 4 x 1000W @ 1Ω
- Bridged Power: 2 x 1200W @ 4Ω | 2 x 1800W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 120W @ 4Ω, 4 x 200W @ 2Ω, 4 x 300W @ 1Ω
- Bridged Power: 2 x 350W @ 4Ω | 2 x 500W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 120W @ 4Ω, 4 x 200W @ 2Ω, 4 x 300W @ 1Ω
- Bridged Power: 2 x 350W @ 4Ω | 2 x 500W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 250W @ 4Ω, 4 x 400W @ 2Ω, 4 x 600W @ 1Ω
- Bridged Power: 2 x 750W @ 4Ω | 2 x 1000W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 250W @ 4Ω, 4 x 400W @ 2Ω, 4 x 600W @ 1Ω
- Bridged Power: 2 x 750W @ 4Ω | 2 x 1000W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 400W @ 4Ω, 4 x 700W @ 2Ω, 4 x 1000W @ 1Ω
- Bridged Power: 2 x 1200W @ 4Ω | 2 x 1800W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 400W @ 4Ω, 4 x 700W @ 2Ω, 4 x 1000W @ 1Ω
- Bridged Power: 2 x 1200W @ 4Ω | 2 x 1800W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids from 2014 to 2023
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids from 2014 to 2023
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids 2024+
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- 12" Subwoofer
- MAX Power: 3000 Watts
- RMS Power: 1500 Watts
- Impedance: 4 OHM DVC ~ 82dB
- Dual Stacked Ferrite Magnets
- Improved Heat Dissipation ~ Reinforced Cone
- 12" Subwoofer
- MAX Power: 3000 Watts
- RMS Power: 1500 Watts
- Impedance: 4 OHM DVC ~ 82dB
- Dual Stacked Ferrite Magnets
- Improved Heat Dissipation ~ Reinforced Cone
- 15" Subwoofer
- 5000 Watts Max / 2500 Watts RMS
- Impedance: 4 OHM DVC ~ 84dB
- Triple Stacked Ferrite Magnets
- Improved Heat Dissipation ~ Reinforced Cone
- Easy repair with Recone Kit EXL-TR15.4DRCK
- 12" Subwoofer
- 4000 Watts Max / 2000 Watts RMS
- Impedance: 4 OHM DVC
- Triple Stacked Ferrite Magnets ~ 84dB
- Improved Heat Dissipation ~ Reinforced Cone
- Easy repair with recone Kit EXL-TRX12.4DRCK
- 15" Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 3000 Watts
- Impedance: 4 OHM DVC
- Quad Stacked Ferrite Magnets ~ 86dB
- Improved Heat Dissipation ~ Reinforced Cone
- 1" Replacement Diaphragm
- Aluminum
- Impedance: 8 Ohm
- For: TW1L~TWX1
- Single
- 6 Channel Full Range
- Flush Mount / Surface Mount
- 6 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- 1 Channel Subwoofer Monoblock
- Flush Mount / Surface Mount
- 1 X 900 Watts RMS @ 1 Ohm
- CLASS D
- Digital Dream LED Lights / Water Resistant IP65
- Built in Crossover / Bass Knob
- 4 Channel Full Range
- Flush Mount / Surface Mount
- 4 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- 6 Channel Full Range
- Flush Mount / Surface Mount
- 6 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- RCA Y Connector
- 2 Female to 1 Male
- 100% Copper OFC
- Metal Ends with Silver Plated Tips
- Dual Twist Wire
- Braided Construction Jacket
- Subwoofer Enclosure
- 2 X 12" Shallow Mount
- RMS Power: 700 Watts(1400 Watts Peak)
- Impedance: 1 Ohm
- 1/2" MDF with Black Carpet
- 93dB
- Subwoofer Enclosure
- 1 X 10" Shallow Mount
- Amplified with Subwoofer Control Knob
- RMS Power: 350 Watts(700 Watts Peak)
- Impedance: 2 Ohm ~ 83dB
- 1/2" MDF with Black Carpet
- Subwoofer Enclosure
- 1 X 12" Shallow Mount
- Amplified with Subwoofer Control Knob
- RMS Power: 350 Watts(700 Watts Peak)
- Impedance: 2 Ohm ~ 87dB
- 1/2" MDF with Black Carpet
- Subwoofer Enclosure
- 1 X 12" Shallow Mount
- RMS Power: 350 Watts(700 Watts Peak)
- Impedance: 2 Ohm
- 1/2" MDF with Black Carpet
- 87dB
- Subwoofer Enclosure
- 2 X 12" Shallow Mount
- RMS Power: 700 Watts(1400 Watts Peak)
- Impedance: 1 Ohm
- 1/2" MDF with Black Carpet
- 93dB
- Complete Upgrade Kit
- Powerful Amplification
- OEM Fitment
- Balanced Sound
- Affordable Loudness
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 13.5 oz barium magnet drives clean midbass
- 1.14" PEI dome tweeter keeps highs crisp
- Stamped steel frame for solid mounting
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 9 oz strontium magnet drives clean midbass
- 0.8" PEI dome tweeter keeps highs crisp
- Grills included
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 9 oz barium magnet drives clean midbass
- 0.8" Mylar tweeter delivers smooth extended highs
- Stamped steel frame for solid mounting
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 9 oz strontium magnet drives clean midbass
- 0.8" PEI dome tweeter keeps highs crisp
- Grills included
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 13.5 oz barium magnet drives clean midbass
- 1.14" PEI dome tweeter keeps highs crisp
- Stamped steel frame for solid mounting
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 13.5 oz strontium magnet drives clean midbass
- 1.14" PEI dome tweeter keeps highs crisp
- Grills included
Sold out
- 6.5" 2-Way Component
- MAX Power: 500 Watts
- RMS Power: 150 Watts
- Impedance: 4 Ohm ~ 86dB
- Ferrite & Neodymium Magnets
- Pair ~ Crossovers & Grills Included
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 20 oz strontium magnet drives clean midbass
- 1.14" PEI dome tweeter keeps highs crisp
- Grills included
- 8" Mid-Range w/RGB LED Cone & Dust Cap
- RMS Power: 275 Watts
- MAX Power: 550 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 95dB
- 6.5" Mid-Range w/RGB LED Cone & Dust Cap
- RMS Power: 250 Watts
- MAX Power: 500 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 94dB
- 8" Mid-Range w/RGB LED Cone & Dust Cap
- RMS Power: 275 Watts
- MAX Power: 550 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 95dB
- CAN-AM Mounting Tube
- X3 Models 2018-2026
- 46.46" Mounting Distance(Higher Position)
- 2" Diameter CNC Cut Stainless Steel
- Easy to Install ~ OEM Fit
- Black Sand Textured Finish
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- 6-Channel High-to-Low Conversion
- Selectable Impedance & Input Modes
- Auto Turn-On (Audio / DC / Remote)
- Anodized Aluminum Housing & Noise Protection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 2-Channel High-to-Low Conversion
- 20V / 40V Input Select
- Auto Turn-On (Audio / DC / Remote)
- Aluminum Casing & Noise Rejection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 4-Channel High-to-Low Conversion
- Selectable Input Impedance (20 / 60 / 20k Ohms)
- Auto Turn-On (Audio / DC / Remote)
- Anodized Aluminum Shell & Noise Rejection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 5-Channel High-to-Low Conversion
- 2 / 5 Channel Input Configurations
- Auto Turn-On (Audio / DC / Remote)
- Rugged Aluminum Housing & Noise Rejection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 6-Channel High-to-Low Conversion
- Selectable Impedance & Input Modes
- Auto Turn-On (Audio / DC / Remote)
- Anodized Aluminum Housing & Noise Protection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- 8" Mid-Bass
- MAX Power: 300 Watts
- RMS Power: 150 Watts
- Impedance: 8 Ohm
- Ferrite Magnet
- 97dB
- 8" Empty Marine Tower
- Grill and Wires Included
- Clamp Included
- RGB LED Lights
- Water Resistant IP65
- Single Piece
- 2-Channel High-to-Low Conversion
- 20V / 40V Input Select
- Auto Turn-On (Audio / DC / Remote)
- Aluminum Casing & Noise Rejection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 2-Channel High-to-Low Conversion
- 20V / 40V Input Select
- Auto Turn-On (Audio / DC / Remote)
- Aluminum Casing & Noise Rejection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 4-Channel High-to-Low Conversion
- Selectable Input Impedance (20 / 60 / 20k Ohms)
- Auto Turn-On (Audio / DC / Remote)
- Anodized Aluminum Shell & Noise Rejection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 5-Channel High-to-Low Conversion
- 2 / 5 Channel Input Configurations
- Auto Turn-On (Audio / DC / Remote)
- Rugged Aluminum Housing & Noise Rejection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 6-Channel High-to-Low Conversion
- Selectable Impedance & Input Modes
- Auto Turn-On (Audio / DC / Remote)
- Anodized Aluminum Housing & Noise Protection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- Universal Compatibility
- No Wire Cutting Required
- Easy Installation
- Enhanced Connectivity
- Optimized for CVO and Ultra Touring Models 2023+
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 2-Channel Class D Power – 2×140W RMS @ 4Ω, 2×230W RMS @ 2Ω, or 380W bridged @ 4Ω
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Water-resistant build for bikes, ATVs, UTVs, and marine
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 2-Channel Class D Power – 2×140W RMS @ 4Ω, 2×230W RMS @ 2Ω, or 380W bridged @ 4Ω
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Water-resistant build for bikes, ATVs, UTVs, and marine
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 4-Channel Class D Power – 4×70W RMS @ 4Ω, 4×140W RMS @ 2Ω, or 2×220W bridged
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Build for bikes, ATVs, UTVs
- 6 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 1 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 3 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 6 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 12 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 16 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 20 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 3" Compression Super Bullet Tweeter
- RMS Power: 120 Watts(240 Watts Peak)
- Impedance: 4 Ohm ~ 98dB
- Flush Mount with Grill
- Neodymium Magnet
- Easily Repaired With The GTX1VC
- 3.75" Compression Super Bullet Tweeter
- RMS Power: 160 Watts(320 Watts Peak)
- Impedance: 4 Ohm ~ 100dB
- Flush Mount with Grill
- Neodymium Magnet
- Easily Repaired With The GTX1XLVC
- Complete Coaxial Upgrade Kit
- Powerful Sound Output
- Factory-Fit Installation
- Amplifier Ready
- Perfect for Daily Drivers & Custom Builds
- Noise Reduction
- Speaker Compatibility 6.5" & 8"
- Durable Construction: High-quality Foam
- Quick, tool-free installation
- Includes: Two speaker foam rings and two baffles foam
- Pair
- Noise Reduction
- Speaker Compatibility 6.5" & 8"
- Durable Construction: High-quality Foam
- Quick, tool-free installation
- Includes: Two speaker foam rings and two baffles foam
- Pair
- Noise Reduction
- Speaker Compatibility 6.5" & 8"
- Durable Construction: High-quality Foam
- Quick, tool-free installation
- Includes: Two speaker foam rings and two baffles foam
- Pair
- 8” Shallow Midrange Speaker 500W MAX / 250W RMS
- 4-Ohm Impedance for Easy Amplifier Matching
- Water-Resistant Cone, Dust Cap, and Cloth Surround
- High Sensitivity (97dB) for Clear, Loud Output
- 1.5” Kapton Voice Coil with 25oz Ferrite Magnet
- 2.5” Mounting Depth for Versatile Install Options
- 6.5” Shallow Midrange Speaker (400W MAX / 200W RMS)
- Water-Resistant Cone & Dust Cap
- 4-Ohm Impedance
- 95dB Sensitivity
- Slim 2.18” Mounting Depth
- 1.5” Kapton Voice Coil with 20oz Ferrite Magnet
- 6x9" Shallow Midrange Speaker 500W MAX / 250W RMS
- 4-Ohm Impedance for Easy Amplifier Matching
- Water-Resistant Cone, Dust Cap, and Cloth Surround
- High Sensitivity (96dB) for Clear, Loud Output
- 1.5" Kapton Voice Coil with 25oz Ferrite Magnet
- 2.83" Mounting Depth for Versatile Install Options
- 8” Shallow Midrange Speaker 500W MAX / 250W RMS
- 4-Ohm Impedance for Easy Amplifier Matching
- Water-Resistant Cone, Dust Cap, and Cloth Surround
- High Sensitivity (97dB) for Clear, Loud Output
- 1.5” Kapton Voice Coil with 25oz Ferrite Magnet
- 2.5” Mounting Depth for Versatile Install Options
- 6.5” Shallow Midrange Speaker (400W MAX / 200W RMS)
- Water-Resistant Cone & Dust Cap
- 2-Ohm Impedance
- 95dB Sensitivity
- Slim 2.18” Mounting Depth
- 1.5” Kapton Voice Coil with 20oz Ferrite Magnet
- 6x9" Shallow Midrange Speaker 500W MAX / 250W RMS
- 2-Ohm Impedance for Easy Amplifier Matching
- Water-Resistant Cone, Dust Cap, and Cloth Surround
- High Sensitivity (96dB) for Clear, Loud Output
- 1.5" Kapton Voice Coil with 25oz Ferrite Magnet
- 2.83" Mounting Depth for Versatile Install Options
- 8" Shallow Midrange Speaker 500W MAX / 250W RMS
- 2-Ohm Impedance for Easy Amplifier Matching
- Water-Resistant Cone, Dust Cap, and Cloth Surround
- High Sensitivity (97dB) for Clear, Loud Output
- 1.5" Kapton Voice Coil with 25oz Ferrite Magnet
- 2.5" Mounting Depth for Versatile Install Options
- Empty Under Dash Subwoofer Enclosure
- OEM Fit ~ 2015 to 2019
- 2 X 6.5" Subwoofers ~ 0.3 Cubic Feet
- Damping Material Inside
- Installation Hardware Included
- Water Resistant IP65 ~ Black
- Empty Under Dash Subwoofer Enclosure
- OEM Fit ~ 2015 to 2019
- 2 X 6.5" Subwoofers ~ 0.3 Cubic Feet
- Damping Material Inside
- Installation Hardware Included
- Water Resistant IP65 ~ Black
- Empty Under Dash Subwoofer Enclosure
- OEM Fit ~ 2020 and Newer
- 2 X 6.5" Subwoofers ~ 0.3 Cubic Feet
- Damping Material Inside
- Installation Hardware Included
- Water Resistant IP65 ~ Black
- Loaded Under Dash Subwoofer Enclosure
- OEM Fit ~ 2015 - 2019
- 2 X ZR6.4D ~ 6.5" Subwoofer(600 Watts RMS)
- Impedance: 1-Ohm ~ 90dB
- Installation Hardware Included
- Water Resistant IP65(Enclosure) ~ Black
- Loaded Under Dash Subwoofer Enclosure
- OEM Fit ~ 2020 to Current
- 2 X ZR6.4D ~ 6.5" Subwoofer(600 Watts RMS)
- Impedance: 1-Ohm ~ 90dB
- Installation Hardware Included
- Water Resistant IP65(Enclosure) ~ Black
- 10" Mid-Bass
- MAX Power: 3000 Watts
- RMS Power: 1500 Watts
- Impedance: 8-Ohm
- Ferrite Magnet
- Easily Repaired With The PRO-1.5KP10.8RCK
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids 2024+
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids from 2014 to 2023
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids 2024+
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Empty Kick Panel Enclosure
- OEM Fit ~ 2015 to Current
- 1 X 6.5" Speaker & 1 X 3.78" Tweeter(each)
- Digital RGB LED Lights
- Pair (L&R) ~ Installation Hardware Included
- Water Resistant IP65 ~ Black
- Loaded Front Kick Panel Enclosure
- OEM Fit ~ 2015 to Current Except R Series
- 1 X NXL-IQ6/BK ~ 6.5" Speaker(each)
- 1 X PRO-TW1LD ~ 3.8" Tweeter(each)
- Digital LED Lights ~ Pair (L&R)
- Water Resistant IP65 ~ Black
- Empty Kick Panel Enclosure
- OEM Fit ~ 2015 to Current
- 1 X 6.5" Speaker & 1 X 3.78" Tweeter(each)
- Digital RGB LED Lights
- Pair (L&R) ~ Installation Hardware Included
- Water Resistant IP65 ~ Black
-$5.00 instant savings
- Digital Media Receiver
- RV & Trailers
- Custom Fit Design For Wall
- 2 Zones
- BT~USB~AUX~AM/FM~HDMI
- 2.75" LCD Screen
- 15" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 2-Ohm 4" DVC
- Ferrite Magnet
- 88.2dB
- 12" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 2-Ohm 4" DVC
- Ferrite Magnet
- 87dB
- 15" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 2-Ohm 4" DVC
- Ferrite Magnet
- 88.2dB
- 12" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 1-Ohm 4" DVC
- Ferrite Magnet
- 87dB
- 12" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 4-Ohm 4" DVC
- Ferrite Magnet
- 87dB
- 15" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 1-Ohm 4" DVC
- Ferrite Magnet
- 87.2dB
- 15" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 4-Ohm 4" DVC
- Ferrite Magnet
- 88.3dB
Sold out
- Subwoofer Enclosure Package
- 2 X 12" ~ SLC-MD12.4 ~ 90dB
- 1 X 1 Channel Subwoofer Amplifier
- 1 X 4 GA Amp Kit
- RMS Power: 500 Watts(1000 Watts Peak)
- 35Hz Ported ~ 1/2" MDF with Black Carpet
Sold out
Sold out
- Loaded Ported Loudspeaker Enclosure
- 2 X 8" PRO-X8M
- 2 X 3.78" PRO-TWX2
- RMS Power: 550 Watts(1100 Watts Peak)
- Impedance: 4-Ohm ~ 99.5dB
- 1/2" MDF with Black Carpet
Sold out
- Loaded Ported Loudspeaker Enclosure
- 2 X 10" PRO-X10M
- 2 X 3.78" PRO-TWX2
- RMS Power: 600 Watts(1200 Watts Peak)
- Impedance: 4 Ohm ~ 101dB
- 1/2" MDF with Black Carpet
Sold out
- Loaded Ported Loudspeaker Enclosure
- 2 X 8" PRO-X8M
- 2 X 3.78" PRO-TWX2
- RMS Power: 550 Watts(1100 Watts Peak)
- Impedance: 4-Ohm ~ 99.5dB
- 1/2" MDF with Black Carpet
Sold out
- 8" Empty Marine Tower
- Grill and Wires Included
- Clamp Included
- RGB LED Lights
- Water Resistant IP65
- Single Piece
Sold out
- Loaded Ported Loudspeaker Enclosure
- 2 X 10" PRO-X10M
- 2 X 3.78" PRO-TWX2
- RMS Power: 600 Watts(1200 Watts Peak)
- Impedance: 4 Ohm ~ 101dB
- 1/2" MDF with Black Carpet
Sold out
- Loaded Ported Loudspeaker Enclosure
- 2 X 10" PRO-X10M
- 2 X 3.78" PRO-TWX2
- RMS Power: 600 Watts(1200 Watts Peak)
- Impedance: 4 Ohm ~ 101dB
- 1/2" MDF with Black Carpet
Sold out
- Loaded Ported Loudspeaker Enclosure
- 2 X 8" PRO-X8M
- 2 X 3.78" PRO-TWX2
- RMS Power: 550 Watts(1100 Watts Peak)
- Impedance: 4-Ohm ~ 99.5dB
- 1/2" MDF with Black Carpet
Sold out
- 10" 2-Way Marine Speaker
- RMS Power: 200 Watts
- Ferrite & Neodymium Magnets
- Impedance: 4 Ohm
- RGB LED Lights ~ Metal Mesh Grill
- Water Resistant IP65
Sold out
- 1 Channel Full Range
- Class D
- 1 ~ 4 Ohm Stable
- 1 x 5000 Watts @ 1 Ohm
- Clip/Protection Indicator
- Bass Control Knob
Sold out
- JL/JLU/JT Loaded Sound Bar
- 4 X 8" Speakers(NOT INCLUDED)
- 4 X PRO-TW4L(INCLUDED)
- 1 X JL-SBAR HARNESS(INCLUDED)
- LED RGB Lights ~ High Profile Slim Design
- RED ~ 2018-2023 Models
- JL/JLU/JT Loaded Sound Bar
- 4 X 8" Speakers(NOT INCLUDED)
- 4 X PRO-TW4L(INCLUDED)
- 1 X JL-SBAR HARNESS(INCLUDED)
- LED RGB Lights ~ High Profile Slim Design
- BLACK ~ 2018-2023 Models
Sold out
- JL/JLU/JT Loaded Sound Bar
- 4 X 8" Speakers(NOT INCLUDED)
- 4 X PRO-TW4L(INCLUDED)
- 1 X JL-SBAR HARNESS(INCLUDED)
- LED RGB Lights ~ High Profile Slim Design
- RED ~ 2018-2023 Models
- JL/JLU/JT Loaded Sound Bar
- 4 X 8" Speakers(NOT INCLUDED)
- 4 X PRO-TW4L(INCLUDED)
- 1 X JL-SBAR HARNESS(INCLUDED)
- LED RGB Lights ~ High Profile Slim Design
- WHITE ~ 2018-2023 Models
Sold out
- Loaded Subwoofer Enclosure
- OEM Fit ~ 2015 to Current ~ Fits Both Sides
- Rear Storage Compartment Replacement
- 1 X NXL-10SUB/BK ~ 10" Subwoofer(300 Watts RMS)
- LED RGB Lights ~ 89dB
- Water Resistant IP65 ~ Black
Sold out
- Loaded Subwoofer Enclosure
- OEM Fit ~ 2015 to Current ~ Fits Both Sides
- Rear Storage Compartment Replacement
- 1 X NXL-10SUB/BK ~ 10" Subwoofer(300 Watts RMS)
- LED RGB Lights ~ 89dB
- Water Resistant IP65 ~ Black
- Empty Subwoofer Enclosure
- OEM Fit ~ 2015 to Current ~ Fits Both Sides
- Rear Seat Compartment Replacement
- Fits 1 X 10" Subwoofer
- Mounting Hardware Included
- Water Resistant IP65 ~ Black
