DS18 SB10A 10" Amplified Car Subwoofer Shallow Enclosure 700 Watts
SB10A
Regular price $279.95EACH



Have a Question? Ask a Specialist
305-928-8734 / Live Chat




- Overview
- Technical Details
- Buy This With
- Reviews
DS18 SB10A 10" Amplified Car Subwoofer Shallow Enclosure 700 Watts
Subwoofers are a must have for any audio system. Some audio enthusiasts don't have a lot of room for big subs, for example, in single cab trucks. Now we have a option for people craving great bass but don't have much space for it.
The SB10A is a slim 10 inch subwoofer in a sealed box that is powered by a powerful, built in 350w RMS amplifier that is sure to get the bass thumping hard in the minimal space that you have available available in your vehicle.
Highlights
- Strong slim 10 inch sub that is sure to bring pounding bass where there is not much space.
- Compact sealed box made of .6 inch MDF with included built in 350w RMS 700w Max high power amplifier.
- Easy to hook up and integrate with any system with the use of high level inputs or RCA jacks, whichever is easiest for you!

BOX SPECIFICATIONS | |
Internal Volume | 12L / 0.42ft3 |
Load Configuration | Parallel In |
Box Type | Sealed Box |
Box Material | 0.59" MDF |
Finish Material | Non-Woven fabric |
(-3bB) Dropping Point | 48Hz |
MEASUREMENTS / MEDIDAS | |
Height | 13.6" / 345.4mm |
Width | 16.7" / 424mm |
Depth 1 | 4.82" / 122.6mm |
Depth 2 | 7.9" / 201mm |
SPECIFICATIONS | |
Speaker Size | 10" / 261mm |
Total Impedance | 2 ohms |
RMS Power Handling | 350W |
MAX Power Handling | 700W |
Sensitivity (1w/1m) | 83dB |
Frequency Response | 38Hz-250Hz |
MOTOR / MOTOR | |
Voice Coil Diameter | 1.5" / 38.6mm |
Voice Coil Former Material | Aluminum |
Winding Material | EISV |
Cone Material | IPP |
Surround Material | Rubber |
Basket Material | SPCC |
Magnet Material | Ferrite |
Magnet Weight | 40 Oz |
AMPLIFIER | |
Amplifier Class | Digital |
Amplifier Type | Monoblock Subwoofer |
Number of Channels | 1 CH |
Minimum Impedance | 2 ohms |
Signal to Noise Ratio | 75 dB |
Efficiency @ 4 ohms | 75% |
Total Harmonic Distortion (T.H.D) | 0.30% |
Low Level Input Range | 0.1-0.6 V |
High Level Input Range | Yes |
Selectable X-Over RMS a 2 OHMS | LPF Fixed |
X-Over Filter Range | 50 - 200 Hz |
Bass Boost Range | 0-6 dB |
Bass Boost Frequency | 50 Hz |
Phase Selector | 0-180° |
Led Indicator | Power - Protection |
Power Input Terminal Size | 8 GA |
Fuse Size | 30 A |
Remote Level Control | Yes |
Thermal Protection | Yes (75°C / 167°F) |
Over-Load Protection | Yes |
DC Output Protection | Yes |
Short Circuit Output Protection | Yes |
Voltage Input Protection | Yes / Si (<8v,>16v) |

I have not seent one review on this product, but decided to buy it anyway. I picked this one because it was 350w rms and the DF was only 200w rms and needed another amp to get the 300w rms. This little this is awesome. Enough low end for what I’m looking for. It’s compact and fits in the back of my Impreza hatchback. Nothing negative to say about it. They person that installed it said they couldn’t use the high input because it didn’t sound right. So they hooked it up differently. I look forward to driving all around now that I have a great sound and bass