- 12" Mid-Bass
- MAX Power: 4500 Watts
- RMS Power: 3000 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 95.8dB
- LED Headlight
- CSP LED Chip
- Compact All in One Design
- 6500K Color Temperature
- 5000 LM ~ 30 Watts Low Beam
- IP65
- Re Cone Kit
- For EXL-XX12.2DHE
- Impedance: 2 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Best Bass Package
- 2 X 12" EXL-X12.4D(1250 Watts RMS)
- 88dB
- 1 X 1 Channel Mono Block Amplifier
- Bass Control Knob
- 1 X Amp Kit
- Toyota RAV4 Best Package
- 2014 - 2018
- 2 X 3.5" Tweeters
- 4 X 6.5" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- Chevrolet Colorado Better Package
- 2015 - 2020
- 2 X 6.5" 2 WAY Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- Exclusive for 6th Gen Ford Bronco
- Fits OEM Roll Bar
- Heavy Duty Stainless Steel
- 360 Degree Rotation
- Black
- Pair
- 1 Channel Subwoofer Monoblock
- Flush Mount / Surface Mount
- 1 X 900 Watts RMS @ 1 Ohm
- CLASS D
- Digital Dream LED Lights / Water Resistant IP65
- Built in Crossover / Bass Knob
- 1 Channel Subwoofer Monoblock
- Flush Mount / Surface Mount
- 1 X 900 Watts RMS @ 1 Ohm
- CLASS D
- Digital Dream LED Lights / Water Resistant IP65
- Built in Crossover / Bass Knob
- 4 Channel Full Range
- Flush Mount / Surface Mount
- 4 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- 6 Channel Full Range
- Flush Mount / Surface Mount
- 6 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- 2" Compression Driver
- RMS Power: 320W (640W MAX)
- Impedance: 8 Ohm ~ 106dB
- Ferrite Magnet - Polyimide Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22PY.8VC
- 2" Compression Driver
- RMS Power: 320W (640W MAX)
- Impedance: 8 Ohm ~ 106dB
- Ferrite Magnet - Polyimide Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22PY.8VC
- 2" Compression Driver
- RMS Power: 320 Watts(640 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Ferrite Magnet - Phenolic Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22PH.8VC
- 2" Compression Driver
- RMS Power: 320 Watts(640 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Ferrite Magnet - Titanium Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22Ti.8VC
- 10" Mid-Bass
- MAX Power: 1000 Watts
- RMS Power: 500 Watts
- Impedance: 8 Ohm
- Ferrite Magnet
- 99.5dB
- 10" Mid-Bass
- MAX Power: 1000 Watts
- RMS Power: 500 Watts
- Impedance: 4 Ohm
- Ferrite Magnet
- 99.5dB
- 10" Mid-Bass
- MAX Power: 1000 Watts
- RMS Power: 500 Watts
- Impedance: 8 Ohm
- Ferrite Magnet
- 99.5dB
- Full Range Amplifier
- 4 Channel
- Class D
- 2 ~ 4 Ohm Stable
- 4 x 200 Watts @ 4 Ohm
- Compact Design
- Subwoofer Monoblock Amplifier
- 1 Channel
- Class D
- 1 ~ 4 Ohm Stable
- 1 x 500 Watts @ 1 Ohm
- Compact Design
- Subwoofer Monoblock Amplifier
- 1 Channel
- Class D
- 1 ~ 4 Ohm Stable
- 1 x 800 Watts @ 1 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class A/B
- 2 ~ 4 Ohm Stable
- 4 x 60 Watts @ 4 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 100 Watts @ 4 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class D
- 2 ~ 4 Ohm Stable
- 4 x 200 Watts @ 4 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class D
- 2 ~ 4 Ohm Stable
- 4 x 275 Watts @ 4 Ohm
- Compact Design
- Subwoofer Monoblock Amplifier
- 1 Channel
- Class D
- 1 ~ 4 Ohm Stable
- 1 x 500 Watts @ 1 Ohm
- Compact Design
- Subwoofer Monoblock Amplifier
- 1 Channel
- Class D
- 1 ~ 4 Ohm Stable
- 1 x 800 Watts @ 1 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class A/B
- 2 ~ 4 Ohm Stable
- 4 x 60 Watts @ 4 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 100 Watts @ 4 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class D
- 2 ~ 4 Ohm Stable
- 4 x 200 Watts @ 4 Ohm
- Compact Design
- Full Range Amplifier
- 4 Channel
- Class D
- 2 ~ 4 Ohm Stable
- 4 x 275 Watts @ 4 Ohm
- Compact Design
- 2" Compression Driver
- RMS Power: 440 Watts(880 Watts Peak)
- Impedance: 8 Ohm ~ 123dB
- Neodymium Magnet
- Dual Polyester Diaphragms - Bolt On
- Easily Repaired With The PRO-DRNMDVC
- 2x 8” PRO-X8M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 550W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- 2x 8” PRO-X8M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 550W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- Fits: 2 x 8” Midrange Speakers
- Fits: 2 x 4” Tweeters
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- 2x 10” PRO-X10M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 600W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- Fits: 2 x 12" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Fits: 2 x 10" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Empty Universal Overhead Flat Mount Pod
- Fits: 2 X 6.5" Speakers
- Mounting Hardware Included
- Water Resistant
- Black ~ ABS
- Single
- Exclusive Loaded Subwoofer Package
- Ford F150/F250/F350(17-24)
- Under Rear Seat 4 Door ~ Down Fire
- 2 X 10" Shallow Subwoofers
- 1 X 1 Channel Mono Block Subwoofer Amplifier
- 1 X Amp Kit
- 1 X Digital LED Lights Controller
- 10" Mid-Range
- MAX Power: 1000 Watts
- RMS Power: 500 Watts
- Impedance: 8-Ohm
- Neodymium Magnet
- 101dB
- 8" Mid-Range
- MAX Power: 800 Watts
- RMS Power: 400 Watts
- Impedance: 8-Ohm
- Neodymium Magnet
- 100.7dB
- 10" Mid-Range
- MAX Power: 1000 Watts
- RMS Power: 500 Watts
- Impedance: 8-Ohm
- Neodymium Magnet
- 101dB
- 12" Mid-Range
- MAX Power: 1000 Watts
- RMS Power: 500 Watts
- Impedance: 8-Ohm
- Neodymium Magnet
- 100dB
Sold out
- 8" Mid-Range
- MAX Power: 800 Watts
- RMS Power: 400 Watts
- Impedance: 4-Ohm
- Neodymium Magnet
- 100.7dB
- Re Cone Kit
- For ZXI12.4D
- Impedance: 4 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- 15" Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 3000 Watts
- Impedance: 4 OHM DVC
- Quad Stacked Ferrite Magnets ~ 86dB
- Improved Heat Dissipation ~ Reinforced Cone
- 12" Subwoofer
- MAX Power: 3000 Watts
- RMS Power: 1500 Watts
- Impedance: 4 OHM DVC ~ 82dB
- Dual Stacked Ferrite Magnets
- Improved Heat Dissipation ~ Reinforced Cone
- 15" Subwoofer
- 5000 Watts Max / 2500 Watts RMS
- Impedance: 4 OHM DVC ~ 84dB
- Triple Stacked Ferrite Magnets
- Improved Heat Dissipation ~ Reinforced Cone
- Easy repair with Recone Kit EXL-TR15.4DRCK
- 12" Subwoofer
- 4000 Watts Max / 2000 Watts RMS
- Impedance: 4 OHM DVC
- Triple Stacked Ferrite Magnets ~ 84dB
- Improved Heat Dissipation ~ Reinforced Cone
- Easy repair with recone Kit EXL-TRX12.4DRCK
- 15" Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 3000 Watts
- Impedance: 4 OHM DVC
- Quad Stacked Ferrite Magnets ~ 86dB
- Improved Heat Dissipation ~ Reinforced Cone
- Marine Speaker Cover
- 8"
- FOR: NXL-PS and CF-PS Series
- Black Polyurethane
- Water Resistant
- Pair
- Re Cone Kit
- For HOOL-X15.4DHE
- Impedance: 4 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- 2.5" Replacement Diaphragm
- Polyimide
- Impedance: 8 Ohm
- For: D225PY
- Single
- Exclusive for 6th GEN Bronco
- 1 X BRO-FD-LR
- 2 X 6.5" PRO-X6.4BMRGB
- 2 X 3.78" PRO-TW1L
- 1 X 4 Channel Amp + Amp Kit
- For 2 & 4 Door Models
- 4 Channel Full Range
- Flush Mount / Surface Mount
- 4 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- 1 Channel Subwoofer Monoblock
- Flush Mount / Surface Mount
- 1 X 900 Watts RMS @ 1 Ohm
- CLASS D
- Digital Dream LED Lights / Water Resistant IP65
- Built in Crossover / Bass Knob
- 4 Channel Full Range
- Flush Mount / Surface Mount
- 4 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- 6 Channel Full Range
- Flush Mount / Surface Mount
- 6 X 180 Watts RMS @ 4 Ohm
- CLASS D
- Digital Dream LED Lights
- Built in Crossover / Water Resistant IP65
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 4 Channel Stereo Full Range
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 300 Watts @ 4 Ohm
- Power ~ Clip ~ Protect Indicators
- Made In Korea ~ Bass Knob
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 5000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 8000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 4 Channel Stereo Full Range
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 300 Watts @ 4 Ohm
- Power ~ Clip ~ Protect Indicators
- Made In Korea ~ Bass Knob
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 5000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 8000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 2" Replacement Diaphragm
- Titanium
- Impedance: 8 Ohm
- For: PRO-D22TI.8
- Single
- CAN-AM X3 (2017-2023) Stage 2 Package
- 1 X CA-X3DS6LDV2 Pair (R&L)
- 1 X CA-X3BASS/D
- 1 X NXL-X1200.5D / 1 X RKS-BT
- 1 X MOFCKIT4 / 1 X LC-DRM
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2026) Stage 1 Package
- 1 X CA-X3DS6LDV2 Pair (R&L)
- 1 X NXL-X360.2D
- 1 X RKS-BT
- 1 X LC-DRM / 1 X MOFCKIT8
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2023) Stage 2 Package
- 1 X CA-X3DS6LDV2 Pair (R&L)
- 1 X CA-X3BASS/D
- 1 X NXL-X1200.5D / 1 X RKS-BT
- 1 X MOFCKIT4 / 1 X LC-DRM
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2023) Stage 3 Package
- 1 X CA-X3DS6LDV2 Pair (R&L) / 1 X RKS-BT
- 1 X CA-X3BASS/D / 1 X CA-X3BASS/P
- 1 X NXL-X1000.1D / 1 X NXL-X360.2D
- 1 X MOFCKIT4 / 1 X MOFCKIT8 / 1 X LC-DRM
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2023) Stage 4 Package
- 1 X CA-X3DS6LDV2 / 1 X MXRC-BT / 1 X NXL-X8PRO/BK
- 1 X CA-X3BASS/D / 1 X CA-X3BASS/P
- 1 X NXL-X1000.1D / 1 X NXL-X600.4D
- 1 X MOFCKIT4 / 1 X MOFCKIT8 / 1 X LC-DRM
- OEM FIT / Water Resistant
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 4-Channel Class D Power – 4×70W RMS @ 4Ω, 4×140W RMS @ 2Ω, or 2×220W bridged
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Build for bikes, ATVs, UTVs
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 2-Channel Class D Power – 2×140W RMS @ 4Ω, 2×230W RMS @ 2Ω, or 380W bridged @ 4Ω
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Water-resistant build for bikes, ATVs, UTVs, and marine
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 4-Channel Class D Power – 4×70W RMS @ 4Ω, 4×140W RMS @ 2Ω, or 2×220W bridged
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Build for bikes, ATVs, UTVs
- 12 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 1 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 3 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 6 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 12 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 16 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 20 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 16 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 1 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 3 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 6 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 12 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 16 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 20 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- Pro Sound. Maximim Loudness - 4x 6.5” PRO-ZT6 – 225W RMS
- Integrated Compression Tweeter
- 4-Channel Class D Amplifier
- Direct 6.5” Factory Fit Easy install
- Complete Install Kit Included
- Exclusive Loaded Subwoofer Package
- RAM 1500,2500,3500 ~ 2021 and UP
- Under Rear Seat 4 Door ~ Down Fire
- 2 X 10" Shallow Subwoofers
- 1 X 1 Channel Monoblock Subwoofer Amplifier
- 1 X AMP KIT
- 1 X Digital LED Lights Controller
- OEM-Fit Design
- Easy Drop-In Replacement
- High Temp Voice Coil
- DIY Friendly
- Restores Original Sound
- 1" Titanium Voice Coil
- Perfect Fit – Designed for PRO-HY6, PRO-HY69, and PRO-HY8 hybrid drivers
- 4-Ohm Impedance
- Easy Installation
- Restores Peak Sound
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 10” Sealed Subwoofer Enclosure for Pickup Trucks
- 350W RMS / 700W MAX Power Handling
- Frequency Response: 30–250Hz
- Impedance 2-Ohm
- Compact Sealed Box: 13L / 0.48ft³ Internal Volume
- Built with 5/8” MDF and Black Carpet Finish
- All-in-one active 10" subwoofer enclosure
- 350W RMS / 700W MAX power ratings
- Built-in Class D monoblock amplifier (2-ohm stable)
- Auto turn-on with high-level input (no REM wire needed)
- Frequency response: 30–250Hz
- Quick-connect terminal for fast, clean installation and easy removal of the enclosure
- 10” Sealed Subwoofer Enclosure for Pickup Trucks
- 350W RMS / 700W MAX Power Handling
- Frequency Response: 30–250Hz
- Impedance 2-Ohm
- Compact Sealed Box: 13L / 0.48ft³ Internal Volume
- Built with 5/8” MDF and Black Carpet Finish
- Active Subwoofer Enclosure
- 2 X 10" Shallow Mount
- RMS Power: 350 Watts(700 Watts Peak)
- Impedance: 2 Ohm
- Class D ~ Bass Knob
- 5/8" MDF with Black Carpet
- 10” Subwoofer Paired with 10” Passive Radiator
- 350W RMS / 700W MAX Power Handling
- Impedance 2-Ohm
- Compact Sealed Box: 0.56ft³ Internal Volume
- Frequency Response: 30–250Hz, -3dB Drop at 45Hz
- Built with 5/8” MDF and Black Carpet Finish
- Direct fit for Jeep Wrangler JL 2-Door Hardtop (2018–2023)
- CNC-machined stainless steel
- 2” (51mm) tube diameter
- Factory-mount compatible
- Flexible wire routing (Buried or Exposed)
- Gloss black UV-protected finish
- Pre-loomed 4-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH6 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Bass Loaded Subwoofer Package
- FORD F150, F250, F350(09-24)
- Under Seat 4 Door
- 2 X 10" Subwoofers
- 1 X Mono Block Amplifier
- 1 X Amp Kit
- JL/JT Loaded Sound Bar Package
- Marine Speakers and Tweeters
- Amplifier , Amp Kit and LED Module
- Water Resistant
- Multiple Colors
- Compatible with 2018-2022. Some Later Models will need slight modifications to the mounting location. Not Compatible with JL 2023+ Models
- 12" Mid-Bass
- MAX Power: 3000 Watts
- RMS Power: 1500 Watts
- Impedance: 8-Ohm
- Ferrite Magnet
- 95dB
- Car Audio Package
- 2 X 6.5" ZXI-654(80 Watts RMS)
- 1 X 2 Channel Amplifier
- 1 X SQBASS(150 Watts RMS)
- Amplified Under Seat Enclosure
- Better Bass Package
- 2 X 12" ~ ZXI12.4D(1000 Watts RMS)
- High Excursion Subwoofers ~ 89.2dB
- 1 X 1 Channel Mono Block Amplifier
- Bass Control Knob
- 1 X Amp Kit
- 6.5" Empty Marine Tower
- Grill and Wires Included
- Clamp Included
- RGB LED Lights
- Water Resistant IP65
- Single Piece
Sold out
- Re Cone Kit
- For PRO-1KP8.4
- Impedance: 4 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
Sold out
- 12 Volt AGM Battery
- 65 AMP Hours
- Thread Lead Alloy Recessed / M6 Bolt
- Maintenance Free
- 2000 Power Watts
- Made in Vietnam
Sold out
- Speaker Wire
- 8-GA
- OFC Ultra Flex
- 100 % Copper
- 100 FT Roll
- RED/BLACK
Sold out
Sold out
- Re Cone Kit
- For PRO-FU8.4
- Impedance: 4 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
