- Technical Details
- Buy This With
DS18 DX2 Kevlar 6.5” 2 Way Premium Quality Car Component Speaker System 460 Watts 4-Ohm
The DX2 set comes with two DX2W 6.5" woofers, as well as two DX2T 1.18" tweeters, and two DX2C passive 2-way crossovers.
The DX2W woofer is a rigid carbon fiber cone with a machined aluminum basket that emits a clear, low end signal at 50Hz and up to 12KHz with a 4 ohms impedance. The DX2T neodymium tweeter, also at 4 ohms, fills the mid-high to high end frequencies adding the right amount of brightness and sizzle to your favorite music.
Also included are the DX2C 2-way passive crossovers which accurately separates wattage and frequencies for your component set, ensuring long lasting and great sounding experiences. The TW ATT options gives you a selection of 0dB, 2dB, and 4dB loudness options at 12dB/oct.
The DS18 DX2 is a quality speaker system that offers exceptional value.
- DX2W 6.5" woofer which handles 100w AES. Featuring a carbon fiber cone, ferrite magnet, machined aluminum basket, and high quality terminals.
- DX2T 1.18" high fidelity neodymium tweeter that is easy to mount and will complete your HQ full range experience.
- DX2C 2-way passive crossover with multiple DB selections so you can be sure to get distortion free HQ sound accurately routed to the proper speaker with ease.
|Nominal Impedance||4 Ohms|
|Peak Power Handling||400W|
|Program Power Handling||200W|
|AES Power Handling||100W|
|Sensitivity (1w/1m)||89 dB|
|Frequency Response||50Hz - 12KHz|
|Recommended HI Pass Crossover||45 Hz|
|Voice Coil Diameter||1.2"/30.5 mm|
|Voice Coil Former Material||TIL|
|Cone Material||Carbon Fiber|
|Surround Materia||Rubber Edge|
|Magnet Weight||20.2 oz|
|Overall Diameter||6.49"/165 mm|
|Front Mount Baffle Cutout||5.59"/142 mm|
|Mounting Depth||2.85"/72.5 mm|
|Nominal Impedance||4 ohms|
|Peak Power Handling||60 Watts|
|Program Power Handling||30 Watts|
|AES Power Handling||15 Watts|
|Frequency Response||800Hz - 20Khz|
|Recommended HI Pass Crossover||3.8 KHz|
|Voice Coil Diameter||0.98"|
|Voice Coil Former Material||ASV|
|Magnet Weight||14 oz|
|Overall Diameter||2" / 51mm|
|Overall Depth||1.1"/28.1 mm|
|Front Mount Baffle Cutout||1.85" x 47 mm|
|Mounting Depth||0.7"/ 18 mm|
|Passive Crossover Ways||2 Ways|
|Frequency Crossover||3.2 KHz|
|Power Handling||300 Watts|
|Cut Off Slope||12dB /Oct|
|Capacitor Type||Metac Film|
|Terminals Type||Screw Terminal|
|Adjustments||Tw Att by Terminal|
|Extra Features||Spk Phase Switch|
|Overall Length||4.3"/110 mm|
|Overall Depth||4.3"/110 mm|
|Overall Height||1.37"/35 mm|
Did my research on several brands of more expensive component sets. Came across DS18 and wanted to see what the hype was about. 2019 mustang GT with factory B&O. Using the Kenwood xr600dsp to power the factory interior speakers. The B&O speakers were good but not great. Swapped the ds18 Dx2 mid bass and tweeter along with the zxi354. Full active. No crossovers used. Everything filtered through the dsp amp app. Pretty cool stuff. Speakers handle it well. Great sound quality. I can say that I compared them directly to CT Sounds Meso 6.5 3 way set by installing one DS18 on my passenger side and CT Sounds on my driver side. CT sounds had more bass excursion from the 6.5 but they maxed out too early and they noticeably cut out some notes. The ds18 handled all the power and sound tight and clean. Great buy.