- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids 2024+
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids from 2014 to 2023
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Fits 6x9" Speakers
- OEM Cut In Fit - Designed for factory saddlebag lids 2024+
- Steel Mesh Speaker Grilles - Matte black grilles with cloth backing for protection
- All Hardware Included - Templates, wiring, and mounting hardware for a clean install
- Durable ABS plus PC Build - UV-resistant materials made for long rides and harsh conditions
- Exclusive for 6th Gen Bronco
- 1 x 6.5" Speaker
- 1 x 3.8" Tweeter
- L & R Front Doors
- For 2 & 4 Door Models
- Black ABS
- Perfect fit for Harley-Davidson saddlebags
- Adds 1/2" mounting depth for perfect speaker clearance and optimized sound alignment
- Easy install for 8" speakers
- Durable CNC-cut ABS construction
- Paintable surface for custom finishes
- 10" Coaxial Midrange (300W RMS / 600W MAX)
- Water-Resistant Cone with Treated Cloth Surround (IP32 Rated)
- 2" Kapton Voice Coil + 1.5” Aluminum Bullet Tweeter
- Wide Frequency Response: 45Hz–20KHz
- High Sensitivity: 100.3dB
- Empty Front Kick Panel Enclosure
- OEM Fit ~ 2015 - 2019
- 1 X 6.5"(each) Speakers
- 1 X 1.7"(each) Tweeters
- Pair (L&R) ~ Black
- Water Resistant IP65
- Medusa/Snake Audio Harness
- Tiffany Style 10 Channel RCA
- 4 x 12 GA OFC Power Wire
- Labeled Wires
- Length: 50 Feet
- Water Resistant
- 6.5" Full-Range w/ RGB Bullet
- MAX Power: 450 Watts
- RMS Power: 225 Watts
- Impedance: 4-Ohm ~ 96dB
- Neodymium Magnet
- With RGB LED Lights
- Kick Panel Pods
- Fits Most 6.5” DS18 Speakers
- Pods Sold as a Set for Driver and Passenger Sides
- Hardware and wiring included
- Durable (PE) waterproof enclosure with UV Protection
- Sealed Type Enclosure
- 15" SPL Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 1-Ohm 4" DVC
- Ferrite Magnet
- 87dB
- Perfect Fit for Maverick X3 (2017+)
- Made for MRX150 Receiver
- Durable Off-Road Build
- Easy Bolt-On Installation
- Illuminated DS18 LED Badge
- 6 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- Converts 6.5” DS18 NXL & CF speakers to 7.7” openings
- Marine-grade ABS and ASA plastics with UV protection
- Clean, flush factory-style installation
- Available in black or white to match your setup
- Sold as a pair with marine-rated mounting hardware
- 2 Channel
- Level Matching Controls(FL,FR)
- Remote Out ~ Auto Turn On
- Speaker Emulator ~ Compact
- Step-Down Method: Electronic / SMC
- 3.2V Pre-Amp Outputs
- JL/JLU/JT Front Door Panels
- 1 X 6.5" Shallow Mount Speaker
- 1 X 3.8" Tweeter
- Hardware Included
- Pair (Left and Right)
- Only Compatible with Short Armrest Models
- Exclusive For 6th Gen Bronco
- 1 X 6.5" Speaker
- 1 X 2.3" Tweeter(Cut Out)
- L & R Rear Doors
- For 4 Door Models Only
- Black ABS
- Gen-X Subwoofer Enclosure
- 1 X 10" ~ GEN-X104D
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 2 Ohm ~ 90dB
- 1/2" MDF with Black Carpet
- 35 HZ Ported Box
- Premium Yellow Straw And Composite Foam Cone
- Ferrite + Neodymium Magnets
- High Power Handling 150W RMS / 300W Peak
- Wide Frequency Response
- 2x Woofers / 2x Tweeters / 2x Crossovers
- 100% OFC Wiring
- Right-Angle L Connector
- Ultra Flex Braided Jacket
- 1 Female to 2 Male RCA
- Durable CCA Connectors
- Empty Under Dash Subwoofer Enclosure
- OEM Fit ~ 2020 and Newer
- 2 X 6.5" Subwoofers ~ 0.3 Cubic Feet
- Damping Material Inside
- Installation Hardware Included
- Water Resistant IP65 ~ Black
- Exclusive for 6th GEN 4-Door Bronco
- Sound Bar with Harness
- 4 x 8" + 2 X 6.5" Speakers
- 2 x 3.78" Tweeters
- 1 X 4 Channel Amp + 1 X Amp Kit
- 1 X LED Module
- Complete Performance Bundle
- High Output Midrange Power - 250W RMS / 500W peak
- Built for Motorcycles & Powersports
- Enhanced Sound with Sealed Baffles
- Shallow Mount + Easy Installation
- Designed for 2018–2023 Jeep Wrangler
- Allows installation of aftermarket 10" subwoofers
- Retains factory enclosure and OEM grille
- Includes DS18 replacement logo badge for factory grille
- No custom fabrication required
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 2-Channel Class D Power – 2×140W RMS @ 4Ω, 2×230W RMS @ 2Ω, or 380W bridged @ 4Ω
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Water-resistant build for bikes, ATVs, UTVs, and marine
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 2-Channel Class D Power – 2×140W RMS @ 4Ω, 2×230W RMS @ 2Ω, or 380W bridged @ 4Ω
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Water-resistant build for bikes, ATVs, UTVs, and marine
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 4-Channel Class D Power – 4×70W RMS @ 4Ω, 4×140W RMS @ 2Ω, or 2×220W bridged
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Build for bikes, ATVs, UTVs
- Mounting Clamp for Sound Bars
- Mainly for SB24BT and SB37BT
- For Tubes 1.5" or Less in Diameter
- Strong Cast Aluminum
- Black
- 1 Piece
- 8" Empty Marine Tower
- Grill and Wires Included
- Clamp Included
- RGB LED Lights
- Water Resistant IP65
- Single Piece
- Bronco Rear Roll Bar Tube
- 6th Gen Bronco
- For 2 & 4 Door Models
- 2" Diameter ~ Adjustable: 43.39" - 49"
- With Clamps
- Black
- JK/JKU Loaded Overhead Sound Bar
- 4 X 8" Speakers (Not Included)
- 4 X 3.72" Tweeters / 2 X 1.5" Drivers (Included)
- 1 X SBAR Harness (Included)
- RGB LED Lights
- Red
- Complete audio upgrade for Jeep JL/JLU models 2018–2023
- Includes front door, dash, soundbar, and bass systems
- Loaded with speakers, tweeters, subwoofers, and amplifiers
- RGB LED lighting with Bluetooth app control
- Tailgate subwoofer enclosure for powerful bass
- Wiring kits and installation accessories included
- Built for loud, clear, full-range sound
- Gen-X Subwoofer Enclosure
- 2 X 10" ~ Gen-X104D
- RMS Power: 800 Watts(1600 Watts Peak)
- Impedance: 2 Ohm ~ 90dB
- 1/2" MDF with Black Carpet
- 35 HZ Ported Box
- Durable 6x9” 8-Ohm Build for efficient, long-lasting performance
- 98dB High Sensitivity for big volume with less power
- Water-Resistant Cone for reliable use in harsh conditions
- Copper Demodulating Ring for reduced distortion and cleaner mid-bass
- High-Impact Mid-Bass ideal for motorcycle fairings and cars
- Durable 6x9” 4-Ohm Build for efficient, long-lasting performance
- 98dB High Sensitivity for big volume with less power
- Water-Resistant Cone for reliable use in harsh conditions
- Copper Demodulating Ring for reduced distortion and cleaner mid-bass
- High-Impact Mid-Bass ideal for motorcycle fairings and cars
- Durable 6x9” 8-Ohm Build for efficient, long-lasting performance
- 98dB High Sensitivity for big volume with less power
- Water-Resistant Cone for reliable use in harsh conditions
- Copper Demodulating Ring for reduced distortion and cleaner mid-bass
- High-Impact Mid-Bass ideal for motorcycle fairings and cars
- 15" High Excursion Subwoofer
- MAX Power: 6000 Watts
- RMS Power: 4000 Watts
- Impedance: 1-Ohm 4" DVC
- Ferrite Magnet
- 87.2dB
- F-350 Better Package
- 2015 - 2020
- 2 X 6.5" 2 WAY Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- 10" 2-Way Marine Speaker
- RMS Power: 200 Watts
- Impedance: 4 Ohm
- Ferrite & Neodymium Magnets
- RGB LED Lights
- Water Resistant IP65
- 10” 2-Way Coaxial Marine Speaker with Integrated RGB Lighting
- Rated 200W RMS / 600W MAX Power @ 4 Ohm
- IP65 Marine Grade & 100% UV Stable for Harsh Environments
- Wide 35Hz–20KHz Frequency Response with 94.3dB Sensitivity
- Includes Stainless Steel Mesh Grille & Silicone Cover for Extra Protection
- LED-BTC Module Compatible (Sold Separately) for RGB Control via App
- 12 Volt AGM Battery
- 20 AMP Hours
- Bolt - A Type Terminals
- Maintenance Free
- 800 Power Watts
- Perfect for Power Sports
- Replacement rotating recone assembly
- Designed for PROJECT360 6.5" Loudspeakers
- Rotating lock-in design – no glue required
- Instant installation and removal
- Compatible with PROJECT360 6.5" Ferrite and Neodymium models
- Ideal for rapid field repairs
- Empty Center Console Enclosure
- OEM Fit ~ 2015 to Current
- 1 X 8" Speaker
- 1 X 3.78" Tweeter
- Installation Hardware Included ~ 1 Piece
- Water Resistant IP65 ~ Black
- RAM 1500 Better Package
- 2012 - 2021
- 2 X 6.5" Component Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- RAM 3500 Better Package
- 2012 - 2021
- 2 X 6.5" Component Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- RAM 3500 Best Package
- 2012 - 2021
- 2 X 6.5" Component Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- F-250 Better Package
- 2015 - 2020
- 2 X 6.5" 2 WAY Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT









































































































































































































