- Re Cone Kit
- For 6XL650N-8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- Premium Yellow Straw And Composite Foam Cone
- Neodymium Magnets
- High Power Handling 180W RMS / 360W Peak
- Wide Frequency Response
- 2x Woofers / 2x Midranges / 2x Tweeters / 2x Crossovers
- Premium Yellow Straw and Composite Foam Cone
- High Power Handling 60W RMS / 120W Peak
- Ferrite Magnets
- 1" TIL Voice Coil
- Wide Frequency Response
- 2" Silk Dome Tweeter
- Neodymium Magnet
- RMS Power: 30 Watts (60 Watts Peak)
- ABS Body Material
- Impedance: 4 Ohm - 90dB
- Crystal-clear high frequencies with zero distortion
- Titanium dome + neodymium magnet
- Rugged aluminum body
- Easy to integrate into OEM or custom setups
- Perfect upgrade for cars or audio projects
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- IP55 water-resistant with UV-protected, corrosion-resistant hardware
- Tiffany-style RCA, high-quality potentiometers, and coated 4-layer PCB
- 2CH/6CH input sum selector & high-level input
- Short-circuit, thermal, and voltage safeguards
- Compact size with direct-insert power & speaker terminals
- 2.5" Bullet Tweeter
- RMS Power: 100 Watts
- Impedance: 4 Ohm ~ 102dB
- Neodymium Magnet
- High Sensitivity
- ABS Body
- 2.5" Bullet Tweeter
- RMS Power: 100 Watts
- Impedance: 4 Ohm ~ 102dB
- Neodymium Magnet
- High Sensitivity
- ABS Body
- Fits Harley-Davidson 2014–2023 saddlebag models
- Holds dual 10" speakers per side for massive sound output
- Durable CNC-molded ABS plastic, waterproof and paintable
- Includes templates and dual-ring adapters for a precise fit
- Maximizes saddlebag space without sacrificing storage capacity
- Fits Harley-Davidson 2014–2023 saddlebag models
- Complete Saddlebag Kit – Includes ABS seals and adapters for 10" speakers
- Durable CNC-molded ABS plastic, waterproof and paintable
- Includes templates for a precise fit
- Enhanced Acoustic Performance – Reinforced seals reduce air leaks and improve sound quality
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 9 oz barium magnet drives clean midbass
- 0.8" Mylar tweeter delivers smooth extended highs
- Stamped steel frame for solid mounting
- 2-Channel RCA Outputs
- Remote Turn-On Wire
- Direct Plug & Play Fit
- Off-Road Ready
- For Ride Command Systems
- Dedicated Subwoofer Signal
- Remote Turn-On Wire
- Quick Installation
- Direct Plug & Play Fit
- Off-Road Ready
- Plug & Play Design
- Direct Fitment – Made specifically for Polaris RZR & MRX150
- Factory-Clean Setup
- Reliable Connections
- Trail-Ready Performance
- Plug & Play Design
- Can-Am Ready – Built for Maverick X3 models
- All-in-One Connection – Power, antenna, and speaker outputs
- Secure Fit
- Fast Install
- Perfect Fit – Designed for PRO-TWZ1 and universal 1" tweeters
- Crystal Clear Sound
- Durable Build
- Easy Replacement
- 8-Ohm Compatible
- Perfect Fit: Designed exclusively for the 10XL1000N-N8
- Complete Kit: Includes all replacement parts for a full recone
- Easy Install
- Restore Power
- OEM Quality
- 4” Soft Dome Midrange with 2" KSV Voice Coil
- 100W AES : 200W Program : 300W MAX Power Handling
- 450Hz–16kHz Frequency Response for Clean Midrange
- High-Powered Neodymium Motor
- Sealed Aluminum Rear Chamber
- Perfect for Studio Monitors or High-End Car Audio
- 5.25” Soft Dome Midrange with 3" KSV Voice Coil
- 150W AES : 300W Program : 400W MAX
- Wide Frequency Response: 400Hz–10KHz
- Neodymium Magnet & Aluminum Body for Superior Output
- Tuned Rear Chamber for Low Resonance & High Clarity
- Perfect for Studio Monitors or High-End Car Audio
- 7” Soft Dome Midrange with 4" KSV Voice Coil
- 200W AES / 400W Program / 500W Peak Power
- 96dB Sensitivity and 350Hz–9KHz Frequency Range
- Neodymium Magnet with Aluminum Enclosure
- Large Tuned Rear Chamber for Clean Output
- Perfect for Studio Monitors or High-End Car Audio
- Glass fiber cone stays rigid at high volume
- Rubber surround holds up to heat and moisture
- 13.5 oz barium magnet drives clean midbass
- 1.14" PEI dome tweeter keeps highs crisp
- Stamped steel frame for solid mounting
- Preloaded with EXL-X10.2D 10" Subwoofer
- Wired to 1 Ohm final impedance
- 3/4" MDF construction with acrylic window
- Integrated Digital LED lighting (LC-DRM required)
- 100% UV stable for outdoor use
- Designed for Polaris RZR PRO and XP cargo boxes
- Pre-loomed 4-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH6 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Sealed-back design
- 300W RMS / 600W MAX
- 96dB sensitivity
- 2" fiberglass voice coil with CCAW windings
- Rugged steel basket
- Recommended for dome and diffuser horn
- RMS Power: 4 x 120W @ 4Ω, 4 x 200W @ 2Ω, 4 x 300W @ 1Ω
- Bridged Power: 2 x 350W @ 4Ω | 2 x 500W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- RMS Power: 4 x 120W @ 4Ω, 4 x 200W @ 2Ω, 4 x 300W @ 1Ω
- Bridged Power: 2 x 350W @ 4Ω | 2 x 500W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- Complete Upgrade Kit
- Premium Sound Quality
- High-Efficiency Power
- Factory Fit Install
- Daily Driver Ready
- RMS Power: 4 x 120W @ 4Ω, 4 x 200W @ 2Ω, 4 x 300W @ 1Ω
- Bridged Power: 2 x 350W @ 4Ω | 2 x 500W @ 2Ω
- Selectable HPF / LPF / Full crossover
- Bass Boost: 0–12dB at 50Hz
- Smart cooling fan + 4-layer PCB
- Power, Protect, Clip LED indicators
- Complete Coaxial Upgrade Kit
- Powerful Sound Output
- Factory-Fit Installation
- Amplifier Ready
- Perfect for Daily Drivers & Custom Builds
- Sharper Projection - Great for Line Array (LA) Speakers
- Wide 90° Dispersion
- Durable ABS Build
- Bolt-On Design
- Universal Fit
- Pro Sound. Maximim Loudness - 4x 6.5” PRO-ZT6 – 225W RMS
- Integrated Compression Tweeter
- 4-Channel Class D Amplifier
- Direct 6.5” Factory Fit Easy install
- Complete Install Kit Included
- Compact 3.5" design fits tight dashboard spaces
- 100W RMS / 200W MAX power handling
- 120Hz–20kHz range for clear mids and highs
- Lightweight glass-fiber composite foam cone
- Compact, high-output neodymium magnet
- Durable aluminum basket
- Installs easily in most factory dashboard locations
- Handles 100W RMS / 200W MAX power
- 120Hz–20kHz range for clear mids and detailed highs
- Lightweight neodymium magnet for strong output
- Durable steel basket construction
- 6 x 200W @ 4-Ohm / 6 x 250Ws @ 2-Ohm / 3 x 500W @ 4-Ohm Bridge
- Full Range Class D
- Variable Crossover
- 2 St- 4-Ohm Bridge
- Power/Protection/Clip Indicator/Remote Level Control
- 1000W MAX Power: Delivers 4 x 150W RMS at 2 ohms
- 4-Channel Class D: Compact and efficient full-range amplification
- High-Level Input: Connects directly to compatible factory radios
- Adjustable Crossovers: Selectable HPF, LPF, and Full Range modes
- Built-In Protection: Clip, power, thermal, voltage, and short-circuit protection
- 1800W MAX Power: Delivers 4 x 150W RMS at 4 ohms
- 4-Channel Class D: Efficient full-range car audio amplification
- Flexible Inputs: Low-level RCA and high-level 2–4CH input
- Adjustable Crossovers: Selectable HPF, LPF, and Full Range modes
- Compact Design: 81% efficiency with high-quality 4-gauge terminals
- 3600W MAX Power: Delivers 4 x 300W RMS at 4 ohms
- 4-Channel Class D: Efficient full-range car audio amplification
- Flexible Inputs: Low-level RCA and high-level 2–4CH input
- Adjustable Crossovers: Selectable HPF, LPF, and Full Range modes
- Compact and Reliable: 90% efficiency with high-quality 4-gauge terminals
























































































































































































