INFINITE 150 AH AGM Power Cell Battery
SOLD OUT






INFINITE 150 AH AGM Power Cell Battery
SOLD OUT
Sale $479.36 / EACH
Reg.$563.95
15% OFF FOR MOVING SALE!
-
Key Features
- 12 Volt AGM Battery
- 150 AMP Hours
- Thread Lead Alloy Recessed / M8 Bolt
- Maintenance Free
- 4000 Power Watts
- Made in Vietnam
-
Technical Data - Manual
SPECS
SKU
INF-150AH
Battery Type
AGM
Nominal Voltage
12.8 V
Capacity
150Ah @ 10hr-rate to 1.8V per cell @ 25°C (77°F)
Maximum Discharge Current
4500 Amps
Cranking Amps (CA)
2250 Amps
Cold Cranking Amps (CCA)
1080 Amps
SPECS
Watts (RMS)
4000W
Internal Resistance
Approx. 4 mΩ
Float Charging Voltage
13.5 to 13.8 Vdc / unit average at 25°C (77°F)
Recommended Charging Current
30 Amps
Nominal Operating Temperature Range
25°C +/- 3° (77°F +/- 5°)
Bolt / Terminal Type
Theard Lead Alloy Recessed / M8 Bolt
Battery Group
N/A
MEASUREMENT
Overall Length
18.97" / 482mm
Overall Width
6.69" / 171mm
Overall Height
9.44" / 240mm
Overall Height (Without Terminals)
9.44" / 240mm
Weight
88 lbs / 40 kg
-
Product Overview
Product Overview
DS18 INF-150AH INFINITE 150 AH 4000W AGM Power Cell 12 Volt Battery
DS18’s INF-150AH is the ultimate AGM power cell for car audio systems that refuse to compromise. Engineered with Absorbed Glass Mat (AGM) technology, this battery delivers high burst reserves, superior amperage retention, and fast recharge capabilities—all while maintaining stable voltage for high-powered systems.
Powers Systems Up to 4000W
With an impressive 4500W of maximum discharge current, 2250 amps of starting power, and 1000 Cold Cranking Amps (CCA), the INF-150AH ensures your system runs strong under the heaviest loads.Quick Recharge
The INF-150AH maintains optimal charge with a float charging voltage range of 13.5V–13.8V DC per unit at 77°F, ensuring consistent performance during extended use while extending the battery’s lifespan.Bolt M5 Terminals
Equipped with secure Bolt M5 terminals, the INF-150AH guarantees a rock-solid connection that enhances conduction. These terminals also offer options for add-on terminals and busbars, giving you the flexibility to expand and optimize your system.Mount with Confidence
With its non-spill, sealed design, the INF-150AH can be installed upside down or in multiple configurations for installation flexibility.Built Tough
Tested to withstand extreme conditions, this power cell keeps your system LOUD and reliable.When you need maximum power and performance, trust DS18 to take your system to the next level.
Disclaimer: Mount batteries away from heat sources. Do not install near engine bays—risk of swelling, especially in hot climates. Use cabin, trunk, or bed locations only.




Hey {Recipient's Name},
{Your Name} wanted to help you out with some gift ideas ;)
Here's a super cool gift.
Cheers,
DS18

INFINITE 150 AH AGM Power Cell Battery
Default Title
Related products
- Smart Battery Charger & Maintainer
- 1.25 AMP Output
- 6 or 12 Volt System
- Thermal~Reverse~Over Charge/Current Protection
- AGM~Lead-Acid~Wet~Gel
- Portable ~ Clamp Connection
- Smart Battery Charger & Maintainer
- 1.25 AMP Output
- 6 or 12 Volt System
- Thermal~Reverse~Over Charge/Current Protection
- AGM~Lead-Acid~Wet~Gel
- Portable ~ Clamp Connection
- Smart Car Battery Charger & Maintainer
- 4 x 1.5 Amp Output ~ Clamp or Bolt-On Connection
- 6 or 12 Volt System
- Lead-Acid~Wet~Gel~AGM~Lithium
- Thermal~Reverse~Over Charge/Current Protect
- Charge Multiple Battery Sizes & Types
- Smart Car Battery Charger & Maintainer
- 4 x 1.5 Amp Output ~ Clamp or Bolt-On Connection
- 6 or 12 Volt System
- Lead-Acid~Wet~Gel~AGM~Lithium
- Thermal~Reverse~Over Charge/Current Protect
- Charge Multiple Battery Sizes & Types
- Smart Battery Charger & Maintainer
- 4 AMP Output
- 6 or 12 Volt System
- Lead-Acid~Wet~Gel~AGM~Lithium
- Thermal~Reverse~Over Charge/Current Protection
- LED Display ~ Clamp Connection
- Smart Battery Charger & Maintainer
- 4 AMP Output
- 6 or 12 Volt System
- Lead-Acid~Wet~Gel~AGM~Lithium
- Thermal~Reverse~Over Charge/Current Protection
- LED Display ~ Clamp Connection
- Smart Car Battery Charger & Maintainer
- 6 AMP Output
- 6 or 12 Volt System
- Lead-Acid~Wet~Gel~AGM~Lithium
- Thermal~Reverse~Over Charge/Current Protection
- LED Display ~ Clamp or Bolt-On Connection
- Smart Car Battery Charger & Maintainer
- 6 AMP Output
- 6 or 12 Volt System
- Lead-Acid~Wet~Gel~AGM~Lithium
- Thermal~Reverse~Over Charge/Current Protection
- LED Display ~ Clamp or Bolt-On Connection
- Smart Car Battery Charger, Maintainer & Booster
- 15 AMP Output ~ Clamp or Bolt-On Connection
- 20 AMP Boost Output
- 6 or 12 Volt System / LED Display
- Thermal~Reverse~Over Charge/Current Protection
- Lead-Acid~Wet~Gel~AGM~Lithium
- Smart Car Battery Charger, Maintainer & Booster
- 15 AMP Output ~ Clamp or Bolt-On Connection
- 20 AMP Boost Output
- 6 or 12 Volt System / LED Display
- Thermal~Reverse~Over Charge/Current Protection
- Lead-Acid~Wet~Gel~AGM~Lithium
- Smart Car Battery Charger,Maintainer,Power Supply & Booster
- 15 Amp Output / 20 Amp Boost Output
- 12 Volt ~ 7 Amp Power Supply Output
- 6 or 12 Volt System / LED Display / Clamp Connection
- Thermal~Reverse~Over Charge/Current Protection
- Lead-Acid~Wet~Gel~AGM~Lithium
- Smart Car Battery Charger,Maintainer,Power Supply & Booster
- 15 Amp Output / 20 Amp Boost Output
- 12 Volt ~ 7 Amp Power Supply Output
- 6 or 12 Volt System / LED Display / Clamp Connection
- Thermal~Reverse~Over Charge/Current Protection
- Lead-Acid~Wet~Gel~AGM~Lithium
- Voltmeter
- Stand Alone
- Remote Output
- Large LED Display
- Low & High Voltage Protection
- Monitor Voltage Levels
- Voltmeter
- Stand Alone
- Remote Output
- Large LED Display
- Low & High Voltage Protection
- Monitor Voltage Levels
- Voltmeter Sequencer
- Large LED Display
- Low & High Voltage Protection
- Eliminate Pop Noises
- Adjustable Delay
- Multiple Remote Outputs
- Voltmeter Sequencer
- Large LED Display
- Low & High Voltage Protection
- Eliminate Pop Noises
- Adjustable Delay
- Multiple Remote Outputs
Let customers speak for us
from 3654 reviewsExcelente battery

Great quality for the money!

I have many different kinds of speakers trying to find the best ones to fit me and I found them DS18. You cannot go wrong with these. 10 out of 10 recommend these to anyone wanting to upgrade Their sound system!

This amp took the already crazy loud ds18 pros an made them even louder not that they needed a amp but man they sure do get down.

It’s supper Awesome it definitely ups your speakers compared to stock unit it really improves the quality of the sound would definitely recommend this is your sign to get it!

These sound amazing with the 4in towers super loud

This fit perfect and sounds great. =The only problem I have is that is doesnt have a place for tweeters.

Been using for 3 years now. Great amp

I replaced my old and very poorly tweeter from my Markbass P210 Combo with this amazing 1" Neodymium Driver And Horn Kit 160 Watts 1.5" Polyimide 8-Ohm Vc.
I took my time to study whether this project was going to work. In order for this new driver horn to fit my bass cabinet, I had to enlarge the existing hole and when placed, I ultimately ended up using one screw because of the new position of the tweeter horn driver.
Guys, this tweeter Amazing...Highly recommended!!
Perfect sound if you are using a Fender passive J Bass or active... A MUST HAVE!!

Absolute great sound. Huge treble volume from this speaker. Love it

Este amplificador para coches es excelente, produce un Sonido muy nítido muy profesional 100% Feliz

Sounds great price is awesome!

I install these with hertz or precision power 6x9 cut kits in saddlebags. Great power handling, crystal clear sound, amazing volume, awesome tone. I'd put them up against the best from the other big names in motorcycle audio, and they always win!

Fit great in a street glide speaker box. Loud, crystal clear, take whatever power you can thow at them. I have not been able to blow a speaker. Its a no brainer, just buy them!

These are the best in the market definitely will buy again from ds18
