
1" Throat Twist On Compression Driver with 1" Phenolic VC 240 Watts 8 ohm





1" Throat Twist On Compression Driver with 1" Phenolic VC 240 Watts 8 ohm
Sale $18.66 / EACH
Reg.$21.95
15% OFF FOR MOVING SALE!
-
Key Features
- 1" Compression Driver
- RMS Power: 120 Watts(240 Watts Peak)
- Impedance: 8 Ohm ~ 103dB
- Ferrite Magnet - Phenolic Diaphragm
- Twist On
- Easily Repaired With The PRO-DR1PVC
-
Technical Data - Manual
DOWNLOAD THE USER MANUAL
SPECS
SKU
PRO-DR1P
Throat Diameter
1" / 25.4mm
Installation Type
Screw-On
Nominal Impedance
8 ohms
Peak Power Handling
240W
Program Power Handling
120W
AES Power Handling
60W
Sensitivity (1w/1m)
103dB
Frequency Response
800Hz-20KHz
Recommended Hi Pass Crossover
900 Hz
MOTOR
Voice Coil Diameter
1" / 25.4mm
Voice Coil Former Material
Kapton
Winding Material
CCA
Diaphragm Material
Phenolic
Magnet Material
Ferrite
Magnet Weight
0.38 Oz
MEASUREMENTS
Overall Diameter
3.13" / 79.5mm
Overall Depth
2.4" / 63mm
Bolt Pattern/Type
M34
Mounting Depth
1.79" / 45.5mm
Product Weight
2 lbs
Product Dimensions
4.75 x 4.75 x 3.5
M/C Weight
22.5 lbs
M/C Dimensions
15 x 10.25 x 7.75
M/C QTY
12
Sold In
Piece
-
Product Overview
Product Overview
DS18 PRO-DR1P 1” Throat Twist On Compression Driver with 1” Throat Phenolic VC 240W 8-Ohm
Proudly engineered and designed in the USA, DS18’s PRO-DR1P is a high powered compression driver that transcends the boundaries of high-frequency excellence. This 1" Throat Twist On Compression Driver with a formidable 1" Throat Phenolic Voice Coil will make your system soar.
Unleash the full spectrum of your high-frequency audio with power handling ratings of 120W RMS and 240W MAX. With Power Ratings that high you can feel the music being reproduced by your system. Feel the energy of every note, every crescendo, and every delicate whisper as the PRO-DR1P effortlessly handles both nuanced melodies and thundering beats.
The PRO-DR1P's impressive frequency response of 800Hz to 20KHz guarantees that no note, no matter how high, escapes your ears. Experience the brilliance of sound across the spectrum, from the intricate highs to the nuanced mids, all the way to the balanced upper limits.
Embrace power without compromise. The High Strength Ferrite magnet drives the PRO-DR1P's capabilities to the edge, ensuring that every note bursts forth with authority, while its robust construction guarantees long-lasting performance in the face of intense musical landscapes.
Seamlessly integrate the PRO-DR1P into your existing setup. Its 8-ohm impedance strikes a perfect balance, enabling it to work harmoniously with a wide range of amplifiers and configurations, ensuring that your audio remains distortion-free and true to the original composition.
The road ahead is filled with soundstages that will blow you away, and the PRO-DR1P is your ticket to this unparalleled audio journey.




Hey {Recipient's Name},
{Your Name} wanted to help you out with some gift ideas ;)
Here's a super cool gift.
Cheers,
DS18

1" Throat Twist On Compression Driver with 1" Phenolic VC 240 Watts 8 ohm
Default Title
Related products
- 1" Compression Driver
- RMS Power: 300 Watts(600 Watts Peak)
- Impedance: 8 Ohm ~ 107dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR1.75VC
- 1" Compression Driver
- RMS Power: 300 Watts(600 Watts Peak)
- Impedance: 8 Ohm ~ 107dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR1.75VC
- 1" Compression Driver
- RMS Power: 200 Watts(400 Watts Peak)
- Impedance: 8 Ohm ~ 103dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR1.35VC
- 1" Compression Driver
- RMS Power: 200 Watts(400 Watts Peak)
- Impedance: 8 Ohm ~ 103dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR1.35VC
- 1" Compression Driver
- RMS Power: 200 Watts(300 Watts Peak)
- Impedance: 8 Ohm ~ 96dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Repaired With: PRO-DR250VC - PRO-DR250TIVC
- 1" Compression Driver
- RMS Power: 200 Watts(300 Watts Peak)
- Impedance: 8 Ohm ~ 96dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Repaired With: PRO-DR250VC - PRO-DR250TIVC
- 1" Compression Driver
- RMS Power: 200 Watts(300 Watts Peak)
- Impedance: 8 Ohm ~ 94dB
- Ferrite Magnet - Phenolic Diaphragm
- Twist On
- Repaired With: PRO-DR250VC - PRO-DR250TIVC
- 1" Compression Driver
- RMS Power: 200 Watts(300 Watts Peak)
- Impedance: 8 Ohm ~ 94dB
- Ferrite Magnet - Phenolic Diaphragm
- Twist On
- Repaired With: PRO-DR250VC - PRO-DR250TIVC
- Compression Driver with Horn
- 1 X PRO-DR1P
- 1 X PRO-H44/BK
- RMS Power: 120 Watts(240 Watts Peak)
- Impedance: 8 Ohm ~ 107.3dB
- Ferrite Magnet
- Compression Driver with Horn
- 1 X PRO-DR1P
- 1 X PRO-H44/BK
- RMS Power: 120 Watts(240 Watts Peak)
- Impedance: 8 Ohm ~ 107.3dB
- Ferrite Magnet
- 1" Compression Driver
- RMS Power: 160 Watts(320 Watts Peak)
- Impedance: 4 Ohm ~ 103dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR1.35VC
- 1" Compression Driver
- RMS Power: 160 Watts(320 Watts Peak)
- Impedance: 4 Ohm ~ 103dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR1.35VC
- 1" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 110dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR2VC
- 1" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 110dB
- Ferrite Magnet - Titanium Diaphragm
- Twist On
- Easily Repaired With The PRO-DR2VC
- 1" Replacement Diaphragm
- Phenolic
- Impedance: 8 Ohm
- For: PRO-DR1P
- Single
- 1" Replacement Diaphragm
- Phenolic
- Impedance: 8 Ohm
- For: PRO-DR1P
- Single
Love it! Shopping took forever but it was worth it
I purchased these because of their smaller footprint. (And, because I had ordered a pair of the wrong diaphragms which belonged to these drivers) I recently restored a pair of BSR DR-1550, 5-way speaker cabinets from 1987. Because the new 1" midrange driver on the top of the cabinet, (Attached to a long 6" conical waveguide that hung low), was 5 inches large and hung right in front of the front firing high frequency horn driver, I was limited with the size of the driver to install in that spot, attached to a small 4" x 4" conical wave guide. These drivers fit perfectly, with roughly half an inch of space to spare. I originally ordered 2 of these driver's diaphragms, thinking they'd fit in another brand's model. (You see, I prefer the sweeter sound of a phenolic diaphragm, over that of a harsher titanium one) But, they didn't fit. So, I merely shelved them for future use. But, after I ran into the spacing errors with all my existing 1" HF drivers, (JBL, EV, Selenium, Peavey, and Foster drivers), I began to look into these driver's spec's, and their size and smaller foot print. On paper, they seemed perfect for this refit. Once I got them, I compared them to all my existing 1" HF drivers, and I was very impressed! They came very close to sounding like my larger, more expensive JBL and Selenium drivers. Once installed, and crossed over with the supplied capacitor, the sound was amazing. These cabinets are tri-amplified by vacuum tube amplifiers, and the 8" JBL midwoofer mounted next to this DS18 driver were a perfect match. They compliment each other beautifully. Not only did this driver fit the required measurements of it's placing, but it also does an excellent job as a high frequency driver, coupled with the two JBL 8" and 15" front firing drivers. If I had ordered 4, instead of two, I would have also used them on the top firing array, with the aforementioned 1" PRV Audio midrange driver. (I employed a Selenium 1" D210Ti, instead) The end result is, that I am completely satisfied with this little, yet powerful driver, and it's incredible sounding frequency range. The nice thing is, I already have two spare diaphragms for them. (But, they're powered by a 50 watt tube amp, and I doubt I'll ever blow them, anyway) I definitely recommend these for not only their compact size, but for their sound quality. You will not be disappointed in whatever configuration you choose to employ them.
Let customers speak for us
from 3542 reviewsI put 6 of these in my Honda pilot and the fucker took me to mars while bumpin Tupac wtf do I do now

Love this amp paired with 1 exl-xx12.2dhe

DS18 SW-16GA-100RB 16-GA Ultra Flex CCA Speaker Wire 100 Ft

Love the sound and volume it partake in

I disappointed they wouldn’t fit in my aftermarket fairing. So i put them in my side box lids. I ran them off the radio with no amp and they are louder than my front ones hooked to an amp. They are amazing

Worked great it was nice and small and fit under the seat of my single cab

It took me abt a year being retired to buy all the pieces, the sub boxes were impressive and the subs and RGB’s are fantastic

2.7" OEM Bullet Tweeter Replacement Upgraded For Jeep JL/JLU/JT 100 Watts RMS 4-Ohm 1" VC

Currently running four of these on all doors and it bangs and is way more louder and clearer than what I thought it was going to be. 10/10 definitely will return to ds18s for more stuff in the future

Very loud

The best single din I’ve ever used, love that you can use the app to tune to your liking as well as change the led colors to whatever you like. So many useful settings and would definitely fit in almost any car.

Great product and service.
Easy install and sounds great.
DS18 , could I get a few stickers to rep on the sling by chance? 🤘

The best loaded enclosure!
I bought the single loaded zxi12 and this is the best loaded box I have found to date. It is tuned nice and low, the sub has very impressive excursion to keep air moving down in the 20's. I will be selling off my other subs and exploring Ds18 brand for the foreseeable future. Excellent product! No buyers remorse here

I bought the single loaded zxi12 and this is the best loaded box I have found to date. It is tuned nice and low, the sub has very impressive excursion to keep air moving down in the 20's. I will be selling off my other subs and exploring Ds18 brand for the foreseeable future. Excellent product! No buyers remorse here!

Sound quality is top notch! Nice loud and crisp! Paired it with my skar 1000x4 and couldn't be happier! Upgraded from my pioneer 6x9s.
