ZXI 10" High Excursion Subwoofer Quad Stacked Magnets 800 Watts Rms DVC 4-Ohm
SOLD OUT






ZXI 10" High Excursion Subwoofer Quad Stacked Magnets 800 Watts Rms DVC 4-Ohm
SOLD OUT
Sale $234.56 / EACH
Reg.$275.95
15% OFF FOR MOVING SALE!
-
Key Features
- 10" High Excursion Subwoofer
- MAX Power: 1600 Watts
- RMS Power: 800 Watts
- Impedance: 4-Ohm 2.5" DVC
- Quad Stacked Ferrite Magnet
- 86dB
-
Technical Data - Manual
DOWNLOAD THE USER MANUAL
SPECS
SKU
ZXI10.4D
Nominal Diameter
10" / 254mm
Nominal Impedance
4 + 4 ohms
RMS Power Handling
800W
Maximum Power Handling
1600W
Sensitivity (1w/1m)
86dB
Frequency Response
20-900Hz
Recommended Lo Pass Crossover
90Hz
MOTOR
Voice Coil Diameter
2.5" / 63.5mm
Voice Coil Former Material
Black Aluminum
Winding Material
CCAW
Cone Material
Non-Pressed Paper
Dust Cap Material
PPI
Surround Material
Foam
Basket Material
Aluminum
Basket Color/Finish
Black Sandblasted
Magnet Material
Ferrite
Magnet Weight
196 Oz (4 x 49 oz)
Displacement Volume
2.23L / 0.078ft3
THIELE & SMALL PARAMETERS
Equivalent Volume Vas
16.84L / 0.594ft3
Free Air Resonance Fs
29Hz
Mechanical Factor Qms
5.169
Electrical Factor Qes
0.473
Total Factor Qts
0.432
Moving Mass Mms
237.173g
Compliance Cms
0.109mm/N
Bl Factor Bl
27.387
Voice Coil Inductance Le
63.69 mH
Diaphragm Area Sd
330.06cm2
DC Resistance Re
3.4+3.4 ohm
Efficiency Bandwidth Product EBP
61.3
RECOMMENDED ENCLOSURES
Sealed Internal Volume
14.2L / 0.5ft3
Sealed Box Output Response F3
41.5Hz
Ported Internal Volume
35.4L / 1.25ft3
Port Size *Square (W x H x Long)
1.16" x 10.31 x 24.49" / 29.5 x 262 x 622.1mm
Port Tuning Frequency FB
30Hz
Ported Box Output Response F3
24Hz
MEASUREMENTS
Overall Diameter
10.96" / 278.5mm
Overall Depth
8.34" / 212mm
Front Mount Baffle Cutout
9.36" / 237.7mm
Mounting Depth
6.91" / 175.5mm
Motor Diameter
6.69" / 170mm
Gross Single Unit Weight
26.5
Dimensions W x L x H
12 x 12 x 9.5
Quantity of Units in Master Carton
2
Gross Master Carton Weight
55
Master Carton Dimensions W x L x H
12.5 x 12.5 x 20.25
-
Product Overview
Product Overview
DS18 ZXI10.4D High Excursion 10" Car Audio Subwoofer 1600W Watts 4-Ohm DVC Quad Stacked Magnets
Experience bass like never before with DS18’s ZXI10.4D: the ultimate subwoofer for enthusiasts who crave thunderous bass!
The ZXI subline is renowned for its high excursion capabilities, and the ZXI10.4D is no exception. This subwoofer handles wattage as high as 1600W while delivering smooth ultra-low frequency responses. The ZXI10.4D’s lower than normal FS (Resonant Frequency), allows it to excel in larger boxes with lower tuning. Whether you prefer sealed or ported boxes, the ZXI10.4D will excel in both, giving you the flexibility to optimize placement in any vehicle.
It’s dual 4-ohm configuration and 2.5-inch voice coils, makes the ZXI10.4D a force to be reckoned with. Handling a staggering 800W RMS power and 1600W of MAX power, ensuring you get the full potential out of your system. The large foam surround and non-pressed paper cone work in perfect harmony, delivering crisp, smooth bass that permeates every corner of your vehicle.
The ZXI10.4D goes beyond raw power and precision. It features a strong stamped basket adorned with show-quality DS18 logos on the frame, magnet boot, magnet, and dust cap. The quad stacked magnets on the ZXI10.4D offer a multitude of benefits, including increased magnetic field strength, improved power handling, enhanced cone control, higher excursion capabilities, greater durability, and superior heat dissipation. Not only will it impress your ears, but it will also outlast any vehicle. This subwoofer is designed to provide you with crisp and clear bass for years to come.
Immerse yourself in bass that is both thunderous and refined, thanks to DS18's commitment to quality and innovation.




Hey {Recipient's Name},
{Your Name} wanted to help you out with some gift ideas ;)
Here's a super cool gift.
Cheers,
DS18

ZXI 10" High Excursion Subwoofer Quad Stacked Magnets 800 Watts Rms DVC 4-Ohm
Default Title
Related products
- 6.5" High Excursion Subwoofer
- MAX Power: 600 Watts
- RMS Power: 300 Watts
- Impedance: 2-Ohm 1.5" DVC
- Quad Stacked Ferrite Magnet
- 87dB
- 6.5" High Excursion Subwoofer
- MAX Power: 600 Watts
- RMS Power: 300 Watts
- Impedance: 2-Ohm 1.5" DVC
- Quad Stacked Ferrite Magnet
- 87dB
- 6.5" High Excursion Subwoofer
- MAX Power: 600 Watts
- RMS Power: 300 Watts
- Impedance: 4-Ohm 1.5" DVC
- Quad Stacked Ferrite Magnet
- 87dB
- 6.5" High Excursion Subwoofer
- MAX Power: 600 Watts
- RMS Power: 300 Watts
- Impedance: 4-Ohm 1.5" DVC
- Quad Stacked Ferrite Magnet
- 87dB
- 8" High Excursion Subwoofer
- MAX Power: 1200 Watts
- RMS Power: 600 Watts
- Impedance: 2-Ohm 2" DVC
- Quad Stacked Ferrite Magnet
- 86dB
- 8" High Excursion Subwoofer
- MAX Power: 1200 Watts
- RMS Power: 600 Watts
- Impedance: 2-Ohm 2" DVC
- Quad Stacked Ferrite Magnet
- 86dB
- 8" High Excursion Subwoofer
- MAX Power: 1200 Watts
- RMS Power: 600 Watts
- Impedance: 4-Ohm 2" DVC
- Quad Stacked Ferrite Magnet
- 86dB
- 8" High Excursion Subwoofer
- MAX Power: 1200 Watts
- RMS Power: 600 Watts
- Impedance: 4-Ohm 2" DVC
- Quad Stacked Ferrite Magnet
- 86dB
- 10" High Excursion Subwoofer
- MAX Power: 1600 Watts
- RMS Power: 800 Watts
- Impedance: 2-Ohm 2.5" DVC
- Quad Stacked Ferrite Magnet
- 86dB
- 10" High Excursion Subwoofer
- MAX Power: 1600 Watts
- RMS Power: 800 Watts
- Impedance: 2-Ohm 2.5" DVC
- Quad Stacked Ferrite Magnet
- 86dB
- 12" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 2-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89.2dB
- 12" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 2-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89.2dB
- 12" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 4-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89.2dB
- 12" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 4-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89.2dB
- 15" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 2-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89dB
- 15" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 2-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89dB
- 15" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 4-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89dB
- 15" High Excursion Subwoofer
- MAX Power: 2000 Watts
- RMS Power: 1000 Watts
- Impedance: 4-Ohm 3" DVC
- Quad Stacked Ferrite Magnet
- 89dB
Let customers speak for us
from 3646 reviewsI replaced my old and very poorly tweeter from my Markbass P210 Combo with this amazing 1" Neodymium Driver And Horn Kit 160 Watts 1.5" Polyimide 8-Ohm Vc.
I took my time to study whether this project was going to work. In order for this new driver horn to fit my bass cabinet, I had to enlarge the existing hole and when placed, I ultimately ended up using one screw because of the new position of the tweeter horn driver.
Guys, this tweeter Amazing...Highly recommended!!
Perfect sound if you are using a Fender passive J Bass or active... A MUST HAVE!!

Absolute great sound. Huge treble volume from this speaker. Love it

Este amplificador para coches es excelente, produce un Sonido muy nítido muy profesional 100% Feliz

Sounds great price is awesome!

I install these with hertz or precision power 6x9 cut kits in saddlebags. Great power handling, crystal clear sound, amazing volume, awesome tone. I'd put them up against the best from the other big names in motorcycle audio, and they always win!

Fit great in a street glide speaker box. Loud, crystal clear, take whatever power you can thow at them. I have not been able to blow a speaker. Its a no brainer, just buy them!

These are the best in the market definitely will buy again from ds18

The tweets I put in brings it all together. Affordable with quality sound.

Just installed in my ultra classic and couldn't be happier. Great sound and very loud. Will definitely be buying another set for the lowers.

A1+all hands up

These are the best tweeters I’ve come across in a very long time.

Fits well!!! Looks good!!! Priced well!!! Performs as expected. The only thing I would change applies to all the DS18 products that have RGB Chasing LEDs in them. Change the wire coloring from Red (12V+) Black (12v-) White (Data) to either Red Black Green , Red Black Yellow, or Red White Green. Having the data wire in white can make it confusing when adding to an LED setup. It would be more inline with the normal practices.

Overall great sound quality and improved my sounds tremendously from a voice perspective it elevated it to a differnt level will definitely recommend to others!

Love the way it works and easy to install
