- 1 male to 2 female RCA Y split design
- 100% OFC for clean, distortion-free signal
- Ultra Flex jacket for easy tight-space routing
- Durable braided insulation for long-term use
- Secure locking RCA connectors for sta able connection
- All-in-one active 10" subwoofer enclosure
- 350W RMS / 700W MAX power ratings
- Built-in Class D monoblock amplifier (2-ohm stable)
- Auto turn-on with high-level input (no REM wire needed)
- Frequency response: 30–250Hz
- Quick-connect terminal for fast, clean installation and easy removal of the enclosure
- 0 GA CCA Ultra Flex Amplifier Wire Kit
- Up to 3500 Watts RMS
- ANL Fuse Holder with 250A
- Power & Remote Wires
- Speaker & RCA Cables
- Installation Accessories ~ Yellow
- JL/JLU/JT Front Door Panels
- 1 X 6.5" Shallow Mount Speaker & 1 X 3.8" Tweeter
- Hardware Included
- Pair (Left and Right)
- Only Compatible with Long Armrest Models
- Pro Audio Stage 3 Package
- 4 X 6.5" ~ PRO-CF6.4NR(250W RMS)
- 4 X 3" ~ PRO-TWN4(140W RMS)
- 1 X 4 Channel Amp ~ G3600.4D(4 X 300W @ 4Ω RMS)
- 1 X OFCKIT4
- Mid-Bass and Super Bullet Tweeter
- Exclusive For 6th GEN 4-Door Bronco
- Fits 4 x 8" Speakers Rear Mount
- Fits 2 x 6.5" Speakers Front Mount
- Fits 2 x 3.78" Tweeters Front Mount
- Harness Included
- Black ABS Plastic
- RAM 1500 Best Package
- 2012 - 2021
- 2 X 6.5" Component Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- Subwoofer Monoblock Amplifier
- 1 Channel
- Class D
- 1 ~ 4 Ohm Stable
- 1 x 800 Watts @ 1 Ohm
- Compact Design
- Full-Range Class D Monoblock
- 1,500W RMS at 1 Ohm
- Compact High-Power Design
- Smart Cooling System
- Remote Level Control
- Clip, Short Circuit, and Overload Protection
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 2" Compression Driver
- RMS Power: 320 Watts(640 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Ferrite Magnet - Titanium Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22Ti.8VC
- 2" Compression Driver
- RMS Power: 320 Watts(640 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Ferrite Magnet - Titanium Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22Ti.8VC
- 2" Compression Driver
- RMS Power: 320 Watts(640 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Ferrite Magnet - Phenolic Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22PH.8VC
- 2" Compression Driver
- RMS Power: 320W (640W MAX)
- Impedance: 8 Ohm ~ 106dB
- Ferrite Magnet - Polyimide Diaphragm
- Bolt On
- Easily Repaired With The PRO-D22PY.8VC
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Premium Yellow Straw and Composite Foam Cone
- Adjustable Swivel Mount Silk Tweeter
- Ferrite Magnets
- High Power Handling 150W RMS / 300W Peak
- Wide Frequency Response
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 4-Channel Class D Power – 4×70W RMS @ 4Ω, 4×140W RMS @ 2Ω, or 2×220W bridged
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Build for bikes, ATVs, UTVs
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 2-Channel Class D Power – 2×140W RMS @ 4Ω, 2×230W RMS @ 2Ω, or 380W bridged @ 4Ω
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Water-resistant build for bikes, ATVs, UTVs, and marine
- Bluetooth 5.1 Streaming Built-In – Play music wirelessly straight from your phone
- 4-Channel Class D Power – 4×70W RMS @ 4Ω, 4×140W RMS @ 2Ω, or 2×220W bridged
- Compact, High-Efficiency Design – Big output in a small, low-heat chassis
- Full Protection Circuitry – Thermal, overload, short-circuit, DC, and voltage protection
- Motorcycle & Powersports Ready – Build for bikes, ATVs, UTVs
- 16 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- Pro Audio NEO Stage 3 Package
- 4 X 6.5" ~ 6XL650N-4(325W RMS)
- 4 X 3" ~ PRO-TWN4(140W RMS)
- 1 X 4 Channel Amp ~ G3600.4D(4 X 300W @ 4Ω RMS)
- 1 X OFCKIT4
- Neo Mid-Range and Super Bullet Tweeter
- 15" Subwoofer
- 5000 Watts Max / 2500 Watts RMS
- Impedance: 4 OHM DVC ~ 84dB
- Triple Stacked Ferrite Magnets
- Improved Heat Dissipation ~ Reinforced Cone
- Easy repair with Recone Kit EXL-TR15.4DRCK
- 15" Subwoofer
- 5000 Watts Max / 2500 Watts RMS
- Impedance: 4 OHM DVC ~ 84dB
- Triple Stacked Ferrite Magnets
- Improved Heat Dissipation ~ Reinforced Cone
- Easy repair with Recone Kit EXL-TR15.4DRCK
- 12" Subwoofer
- 4000 Watts Max / 2000 Watts RMS
- Impedance: 4 OHM DVC
- Triple Stacked Ferrite Magnets ~ 84dB
- Improved Heat Dissipation ~ Reinforced Cone
- Easy repair with recone Kit EXL-TRX12.4DRCK
- JK/JKU Loaded Overhead Sound Bar
- 4 X 8" Speakers (Not Included)
- 4 X 3.72" Tweeters / 2 X 1.5" Drivers (Included)
- 1 X SBAR Harness (Included)
- RGB LED Lights
- White
- JK/JKU Loaded Door Panel Package
- 2 X Front and 2 X Rear (L&R)
- 4 X 6.5" Pro Loudspeakers
- 4 X 3.78" Tweeters
- Amp Kit & LED Module
- Full-Range 5-Channel Class D Amplifier
- 2800W MAX Power Output
- 1200W RMS Subwoofer Channel at 1 Ohm
- Bridgeable 550W x 2 at 4 Ohms
- Smart Cooling with LED Clip Indicator
- 6x9” High-Sensitivity Midrange Speaker (100 dB Output)
- 200W RMS / 400W Peak Power Handling
- Neodymium Magnet for Lightweight, High Efficiency
- 100 Hz–17 kHz Frequency Range for Clear Vocals
- Aluminum Basket with High-Performance Voice Coil
- 12 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- Fits Front Passenger-Side Can-Am Maverick X3 (2017-Up)
- Pre-Loaded 10” Subwoofer – DS18 IXS10.4D rated at 600W RMS / 1200W MAX
- Sealed & Off-Road Ready – Water- and vibration-resistant for extreme terrain
- Hard-Hitting Bass – Optimized for strong low-end in tight spaces
- Expandable System – Pair with matching enclosures for full-cabin bass coverage
- Fits Front Driver-Side Can-Am Maverick X3 2-Door & 4-Door (2017-Up)
- Pre-Loaded 10” Subwoofer – DS18 IXS10.4D rated at 600W RMS / 1200W MAX
- Sealed & Off-Road Ready – Water- and vibration-resistant for extreme terrain
- Hard-Hitting Bass – Optimized for strong low-end in tight spaces
- Expandable System – Pair with matching enclosures for full-cabin bass coverage
- Fits Front Passenger-Side Can-Am Maverick X3 (2017-Up)
- Pre-Loaded 10” Subwoofer – DS18 IXS10.4D rated at 600W RMS / 1200W MAX
- Sealed & Off-Road Ready – Water- and vibration-resistant for extreme terrain
- Hard-Hitting Bass – Optimized for strong low-end in tight spaces
- Expandable System – Pair with matching enclosures for full-cabin bass coverage
- Fits Rear Driver-Side Can-Am Maverick X3 (2017-Up)
- Pre-Loaded 10” Subwoofer – DS18 IXS10.4D rated at 600W RMS / 1200W MAX
- Sealed & Off-Road Ready – Water- and vibration-resistant for extreme terrain
- Hard-Hitting Bass – Optimized for strong low-end in tight spaces
- Expandable System – Pair with matching enclosures for full-cabin bass coverage
- Fits Rear Passenger-Side Can-Am Maverick X3 (2017-Up)
- Pre-Loaded 10” Subwoofer – DS18 IXS10.4D rated at 600W RMS / 1200W MAX
- Sealed & Off-Road Ready – Water- and vibration-resistant for extreme terrain
- Hard-Hitting Bass – Optimized for strong low-end in tight spaces
- Expandable System – Pair with matching enclosures for full-cabin bass coverage
- Fits Harley-Davidson 2014–2023 saddlebag models
- Complete Saddlebag Kit – Includes ABS seals and adapters for 10" speakers
- Durable CNC-molded ABS plastic, waterproof and paintable
- Includes templates for a precise fit
- Enhanced Acoustic Performance – Reinforced seals reduce air leaks and improve sound quality
- Fits Harley-Davidson 2014–2023 saddlebag models
- Complete Saddlebag Kit – Includes ABS seals and adapters for 10" speakers
- Durable CNC-molded ABS plastic, waterproof and paintable
- Includes templates for a precise fit
- Enhanced Acoustic Performance – Reinforced seals reduce air leaks and improve sound quality
- 5.25” Soft Dome Midrange with 3" KSV Voice Coil
- 150W AES : 300W Program : 400W MAX
- Wide Frequency Response: 400Hz–10KHz
- Neodymium Magnet & Aluminum Body for Superior Output
- Tuned Rear Chamber for Low Resonance & High Clarity
- Perfect for Studio Monitors or High-End Car Audio
- Bass Loaded Subwoofer Package
- CHEVY / GMC 1500,2500,3500(19-24)
- Under Seat 4 Door
- 2 X 10" Subwoofers
- 1 X Mono Block Amplifier
- 1 X Amp Kit
- Ultimate Ford Bronco Audio Package
- For 4 Door 6TH Gen
- 1 X BRO-SBAR/BK ~ 1 X BRO-BASS
- 1 X BRO-FD-LR ~ 1 X BRO-BD-LR
- 4 X 8" `~ 6 X 6.5" Speakers ~ 4 X 3.78" Tweeters
- 1 X 4 Channel ~ 1 X 5 Channel Amps ~ 2 X AMP KITS ~ 1 X LC-RGB
- Re Cone Kit
- For HOOL-X15.1DSPL
- Impedance: 1 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Jeep JK/JKU Harness
- For: JK Factory Radio and SQBASS
- OFC Wires
- Plug and Play OEM Connectors
- Reduce Installation Time
- 1 KIT
- 12 Volt AGM Battery
- 150 AMP Hours
- Thread Lead Alloy Recessed / M8 Bolt
- Maintenance Free
- 4000 Power Watts
- Made in Vietnam
- Mounting Clamp for Sound Bars
- Mainly for SB24BT and SB37BT
- For Tubes 1.5" or Less in Diameter
- Strong Cast Aluminum
- Black
- 1 Piece
- Toyota Tacoma Good Package
- 2005 -2021
- 2 X 1" Tweeters
- 2 X 6.5" 2 WAY Speakers
- 2 X 6x9" 3 WAY Speakers
- Back Up Camera
- Surface Mount
- High Resolution / Low Illumination
- Color Camera Screen Image
- Distance Scale
- Water Resistant IP67
- ZR Bass Package
- 1 X ZR112LD(800 Watts RMS) ~ 84dB
- 1 X 1 Channel Mono Block Amplifier
- Bass Control Knob
- 1 X Amp Kit
- Ported Loaded Enclosure
- 6.5" Empty Marine Tower
- Grill and Wires Included
- Clamp Included
- RGB LED Lights
- Water Resistant IP65
- Single Piece
- JL/JT Loaded Door Panel Package
- 2 X Front and 2 x Rear(L&R)
- 6 X 6.5" Pro Audio Loudspeakers
- 6 X 2.3" Super Bullet Tweeters
- 1 X LED-BTC
- Black
- Re Cone Kit
- For PRO-1KP8.8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- JK/JKU/JL/JLU Overhead Sound Bar
- 4 X 8" Speakers
- 4 X 4" Tweeters
- 4 X 1" Drivers
- Mounting Bracket and Hardware Included
- Multiple Colors
- Not compatible with 2023-2024 Jeeps











































































































































































































































































































































