- Line Output Converterr
- 2 Channel
- Speaker Emulator
- Remote Output with Signal Sensing
- Power LED
- Compact Design
- Square Fuse Holder
- ANL 200 Amp Fuse Included
- Connects to 1/0 - 4 GA Power Wire
- Nickel Plated Contacts
- Heat Resistant Base and Cover
- RCA Y Connector Kit
- 1 Female to 2 Male
- 100% Copper OFC Dual Twist Wire
- Metal Ends with Silver Plated Tips
- Braided Construction Jacket
- PAIR - Black / Red
- RCA 2 Channel
- 3 Feet
- 100% Copper OFC
- Metal Ends with Silver Plated Tips
- Dual Twist Wire
- Braided Construction Jacket
- 8" Shallow Mid-Range w/Bullet
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 95dB
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 3" Compression Super Bullet Tweeter
- RMS Power: 120 Watts(240 Watts Peak)
- Impedance: 4 Ohm ~ 98dB
- Flush Mount with Grill
- Neodymium Magnet
- Easily Repaired With The GTX1VC
- 3.75" Compression Super Bullet Tweeter
- RMS Power: 160 Watts(320 Watts Peak)
- Impedance: 4 Ohm ~ 100dB
- Flush Mount with Grill
- Neodymium Magnet
- Easily Repaired With The GTX1XLVC
- Ultra-Slim 1.16” mounting depth for shallow installs
- 95dB sensitivity for high output with less power
- 120W RMS / 240W MAX handling
- Neodymium Motor for fast, accurate response
- Unique steel mesh grille
- Shallow-mount 8” subwoofer designed for tight installations
- Dual 4-ohm voice coils for flexible system wiring
- 400W RMS / 800W MAX power output
- Water-resistant paper cone with aluminum reinforcement
- 3.5” mounting depth ideal for compact enclosures
- Direct fit for 2020+ Polaris Slingshot
- Heavy duty powder coated metal tray
- Adjustable to fit multiple battery sizes
- Easy bolt on install with included hardware
- Supports high power audio and accessories
- 1 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 3 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 6 ft length ideal for vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 12 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 16 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 20 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 1 male to 2 female RCA Y split design
- 100% OFC for clean, distortion-free signal
- Ultra Flex jacket for easy tight-space routing
- Durable braided insulation for long-term use
- Secure locking RCA connectors for sta able connection
- 1 female to 2 male RCA splitter for clean signal distribution
- 100% OFC wiring for clear, low-loss audio
- Ultra Flex jacket for easy installation
- Lightweight, secure copper-clad connectors
- 10 pack ideal for system builds and upgrades
- 1 male to 2 female RCA splitter for clean signal distribution
- 100% OFC wiring for clear, low-loss audio
- Ultra Flex jacket for easy installation
- Lightweight, secure copper-clad connectors
- 10 pack ideal for system builds and upgrades
- Converts 6.5” DS18 NXL & CF speakers to 7.7” openings
- Marine-grade ABS and ASA plastics with UV protection
- Clean, flush factory-style installation
- Available in black or white to match your setup
- Sold as a pair with marine-rated mounting hardware
- Extreme SPL Output - 90W AES, 180W Program, 360W Peak
- Cut-Through-the-Noise Clarity - Titanium diaphragm
- Wide-Throw Sound Control - 140° horizontal dispersion
- High-Efficiency - 101dB Sensitivity
- Perfect for Loud Setups
- OEM Fit - Direct replacement for PRO-DK175WG & PRO-DKN175WG.
- 1.75” Titanium Build - Durable, high-temp diaphragm for crisp highs.
- Precision Copper Winding - Stable, efficient high-frequency performance.
- Factory-Level Output
- Restores original SPL and clarity
- Ultra-Shallow 1.3" Mounting Depth
- Razor-Sharp Highs (3.15kHz–20kHz)
- 1" Aluminum Voice Coil + Diaphragm
- Built-In 4.7µF Bass Blocker
- Competition-Ready SPL Output
- Perfect Fit for Maverick X3 (2017+)
- Made for MRX150 Receiver
- Durable Off-Road Build
- Easy Bolt-On Installation
- Illuminated DS18 LED Badge
- 6.5" midrange speakers + universal OEM adapter
- 250W RMS / 500W MAX power handling for loud and clear audio
- 96dB sensitivity for efficient high-output sound
- Adapter converts 6.75" factory mounts to 6.5" speakers
- Pre-drilled OEM mounting points for easy installation
- Ideal for car audio upgrades and pro audio systems
- RCA 2 Channel Pack 10 pieces
- 12 Feet
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- RCA 2 Channel Pack 10 pieces
- 3 Feet
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- Perfect Fit: Designed exclusively for the 8XL750NB-4
- Complete Kit: Includes all replacement parts for a full recone
- Easy Install
- Restore Power
- OEM Quality
- Perfect Fit: Designed exclusively for the 12XL1000N-8
- Complete Kit: Includes all replacement parts for a full recone
- Easy Install
- Restore Power
- OEM Quality
- Perfect Fit: Designed exclusively for the 69XL750NB-4
- Complete Kit: Includes all replacement parts for a full recone
- Easy Install
- Restore Power
- OEM Quality
- 300W RMS / 600W MAX power handling / Ferrite Magnet
- Curvilinear cone for improved response
- Aluminum basket construction
- Plug-and-play recone system – no glue required
- Patent-Pending rotating recone design for instant repairs
- Compatible recone model PROJECT360.694RCK
- 300W RMS / 600W MAX power handling / Ferrite Magnet
- Curvilinear cone for improved response
- Aluminum basket construction
- Plug-and-play recone system – no glue required
- Patent-Pending rotating recone design for instant repairs
- Compatible recone model PROJECT360.84RCK
- Designed for 2018–2023 Jeep Wrangler
- Allows installation of aftermarket 10" subwoofers
- Retains factory enclosure and OEM grille
- Includes DS18 replacement logo badge for factory grille
- No custom fabrication required
- Replacement rotating recone assembly
- Designed for PROJECT360 6x9" Loudspeakers
- Rotating lock-in design – no glue required
- Instant installation and removal
- Compatible with PROJECT360 6x9" Ferrite and Neodymium models
- Ideal for rapid field repairs
- RCA Y Connector
- 1 Female 2 Male
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- Tweeter Harness
- FOR: Most ~ Jeep / Chrysler / Dodge
- FOR: Most ~ Hyundai / Mazda
- Plug and Play OEM Connector
- Reduce Installation Time
- Pair
- Speaker Harness
- FOR: Most ~ Jeep / Chrysler / Dodge
- FOR: Most ~ Hyundai / Mazda
- Plug and Play OEM Connector
- Reduce Installation Time
- Pair
- 6.5" Slim Coaxial 2-Way
- RMS Power: 200 Watts (400 Watts Peak)
- Ultra-Shallow Mounting Depth: 2.15"
- Ferrite & Neodymium Magnets
- Built-in Tweeter
- Water-Resistant Cone with Treated Cloth Surround (IP32 Rated)
- 300W RMS / 600W MAX power handling / Ferrite Magnet
- Curvilinear cone for improved response
- Aluminum basket construction
- Plug-and-play recone system – no glue required
- Patent-Pending rotating recone design for instant repairs
- Compatible recone model PROJECT360.64RCK
- Replacement rotating recone assembly
- Designed for PROJECT360 6.5" Loudspeakers
- Rotating lock-in design – no glue required
- Instant installation and removal
- Compatible with PROJECT360 6.5" Ferrite and Neodymium models
- Ideal for rapid field repairs
































































































































































