
8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade






8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade
Sale $70.51 / EACH
Reg.$82.95
15% OFF FOR MOVING SALE!
Availability:282 Items
-
Key Features
- OEM Replacement for B&O Sound System
- 8" Subwoofer
- MAX Power: 400 Watts
- RMS Power: 200 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- Splicing Required
-
Technical Data - Manual
DOWNLOAD THE USER MANUAL
SPECS
SKU
SLC8S
Nominal Diameter
8" / 203mm
Nominal Impedance
4 Ohm
RMS Power Handling
200 W
Maximum Power Handling
400 W
Sensitivity (1w/1m)
84 dB
Frequency Response
35Hz-4.5KHz
Recommended Lo Pass Crossover
120Hz
OEM Fit
Replacement in any Bronco with a B&O Sound System
MOTOR
Voice Coil Diameter
2" / 50.8mm
Voice Coil Former Material
Aluminum
Winding Material
CCAW
Cone Material
Non-Pressed Paper
Dust Cap Material
Paper
Surround Material
Foam
Basket Material
Steel
Basket Color/Finish
Gloss black
Magnet Material
Ferrite
Magnet Weight
38 Oz
THIELE & SMALL PARAMETERS
Equivalent Volume Vas
7.78L / 0.27ft3
Free Air Resonance Fs
50 Hz
Mechanical Factor Qms
6.875
Electrical Factor Qes
0.889
Total Factor Qts
0.787
Moving Mass Mms
115.524 g
Compliance Cms
0.034 mm/N
Bl Factor Bl
8.568
Voice Coil Inductance Le
0.455 mH
Diaphragm Area Sd
201.23 cm2
DC Resistance Re
3.4 ohms
Efficiency Bandwidth Product EBP
56.24
MEASUREMENTS
Overall Diameter
8.42" / 214mm
Overall Depth
4.92" / 125mm
Front Mount Baffle Cutout
7.2" / 183mm
Mounting Depth
3.85" / 98mm
Motor Diameter
5.51" / 140mm
Gross Single Unit Weight (lb)
7
Dimensions W x L x H (Inches)
9 x 9 x 5.75
-
Product Overview
Product Overview
DS18 SLC8S 8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade
Bring the boom back to your Bronco with DS18’s SLC8S—a direct OEM replacement subwoofer for Ford Bronco models equipped with the B&O sound system. Built for deep bass and clarity you can feel, the SLC8S fits perfectly into your factory enclosure without the need for mods or extra space.
Built to Perform
This 8” subwoofer runs 200W RMS / 400W MAX and operates at 4 Ohms, giving you more than enough output to bring that low-end punch your system’s been missing. With a frequency response of 35Hz–4.5KHz, it also hits tight midbass when needed.The 2” aluminum voice coil, paper cone, and foam surround are tuned for responsive, clean output, while the 38oz ferrite magnet drives power and accuracy into every drop. Plus, at 3.85” mounting depth, it fits like a glove inside your Bronco’s stock sub location.
If your Bronco came with a B&O sound system, this is the upgrade you’ve been looking for.




Hey {Recipient's Name},
{Your Name} wanted to help you out with some gift ideas ;)
Here's a super cool gift.
Cheers,
DS18

8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade
Default Title

Related products
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
Love it. Sounds so much better than the stock subwoofer speaker. The only problem I had I thought it would be plug and play. It took me a lot of searching to figure out how to hook it up to my system.
Solid all around product. Price, Installation and Quality Output all outstanding.
Let customers speak for us
from 3690 reviewsBack up camera arrived on time and as described. Works just fine. Recommend this seller

Great sound quality doesn’t and super clear purchased 4 now on my way in purchasing 8 more

The speaker covers are great quality and fit perfectly. The price was the best I could find anywhere.

Love these speakers sound amazing compared to my stock speakers

They are amazing just outstanding better then I could imagine i will definitely be installing more

They are very loud and they are clear

What can I say about a fuse holder. It’s mounted don’t worry. In photo it’s not mounted

I put DS18s in one of my jeeps and I love it. I will be upgrading my other two jeeps with the same brand DS18. 10 out of 10 recommend if you’re reading this review get some we like it loud!

With amp i can tell a difference in my 8s . They hit hard with the power that comes out of this amp

These speakers in my opinion out perform higher priced tower speaker from ds18 and other major brands!!!

Love the way it fits, looks and sounds, ds18 products all the way,love the enclosed and padding fender pods, dual 8” on each pod is extremely ideal, because all other products are dual 6.5” only

IXS Shallow-Mount 12" Fiber Glass Subwoofer 800 Watts Rms SVC 4-Ohm

the only issue I had was I couldn't find a radio on (Blue/white stripe) anywhere ut i was able to pick up a Acc/Run on terminal from my relay pack under the hood... and it Rocks !! I used the stock 25W jeep head and NVX dash and roll bar kit and this DS18 SQBASS Underseat Subwoofer im still tweaking the gain/boost/filter for the jeep but its close !!!

Great value sub

This sound bar with the recommended AMP is definitely a big upgrade from factory. It’s super loud. We also had dash speaker/AMP upgrade and mounded the Sub box to the cargo door with 10” Subs/AMP. This sound system is so loud now you have no problem hearing it with the top, windows open, running 80 mph down the road. This was a Mother’s Day gift and my wife loves it.
