8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade
SOLD OUT






8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade
SOLD OUT
Sale $70.51 / EACH
Reg.$82.95
15% OFF FOR Labor Day Sale!
-
Key Features
- OEM Replacement for B&O Sound System
- 8" Subwoofer
- MAX Power: 400 Watts
- RMS Power: 200 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- Splicing Required
-
Technical Data - Manual
DOWNLOAD THE USER MANUAL
SPECS
SKU
SLC8S
Nominal Diameter
8" / 203mm
Nominal Impedance
4 Ohm
RMS Power Handling
200 W
Maximum Power Handling
400 W
Sensitivity (1w/1m)
84 dB
Frequency Response
35Hz-4.5KHz
Recommended Lo Pass Crossover
120Hz
OEM Fit
Replacement in any Bronco with a B&O Sound System
MOTOR
Voice Coil Diameter
2" / 50.8mm
Voice Coil Former Material
Aluminum
Winding Material
CCAW
Cone Material
Non-Pressed Paper
Dust Cap Material
Paper
Surround Material
Foam
Basket Material
Steel
Basket Color/Finish
Gloss black
Magnet Material
Ferrite
Magnet Weight
38 Oz
THIELE & SMALL PARAMETERS
Equivalent Volume Vas
7.78L / 0.27ft3
Free Air Resonance Fs
50 Hz
Mechanical Factor Qms
6.875
Electrical Factor Qes
0.889
Total Factor Qts
0.787
Moving Mass Mms
115.524 g
Compliance Cms
0.034 mm/N
Bl Factor Bl
8.568
Voice Coil Inductance Le
0.455 mH
Diaphragm Area Sd
201.23 cm2
DC Resistance Re
3.4 ohms
Efficiency Bandwidth Product EBP
56.24
MEASUREMENTS
Overall Diameter
8.42" / 214mm
Overall Depth
4.92" / 125mm
Front Mount Baffle Cutout
7.2" / 183mm
Mounting Depth
3.85" / 98mm
Motor Diameter
5.51" / 140mm
Gross Single Unit Weight (lb)
7
Dimensions W x L x H (Inches)
9 x 9 x 5.75
-
Product Overview
Product Overview
DS18 SLC8S 8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade
Bring the boom back to your Bronco with DS18’s SLC8S—a direct OEM replacement subwoofer for Ford Bronco models equipped with the B&O sound system. Built for deep bass and clarity you can feel, the SLC8S fits perfectly into your factory enclosure without the need for mods or extra space.
Built to Perform
This 8” subwoofer runs 200W RMS / 400W MAX and operates at 4 Ohms, giving you more than enough output to bring that low-end punch your system’s been missing. With a frequency response of 35Hz–4.5KHz, it also hits tight midbass when needed.The 2” aluminum voice coil, paper cone, and foam surround are tuned for responsive, clean output, while the 38oz ferrite magnet drives power and accuracy into every drop. Plus, at 3.85” mounting depth, it fits like a glove inside your Bronco’s stock sub location.
If your Bronco came with a B&O sound system, this is the upgrade you’ve been looking for.




Hey {Recipient's Name},
{Your Name} wanted to help you out with some gift ideas ;)
Here's a super cool gift.
Cheers,
DS18

8" 200W RMS Subwoofer for 6th Gen Ford Bronco - OEM Replacement for B&O Sound Upgrade
Default Title

Related products
Size:
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
Size:
- 8" Subwoofer
- MAX Power: 400 Watts
- RMS Power: 200 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 84dB
- 8" Subwoofer
- MAX Power: 400 Watts
- RMS Power: 200 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 84dB
Size:
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
Size:
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
Size:
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
Size:
- 8" Subwoofer
- MAX Power: 400 Watts
- RMS Power: 200 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 84dB
- 8" Subwoofer
- MAX Power: 400 Watts
- RMS Power: 200 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 84dB
Size:
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
- 10" Subwoofer
- MAX Power: 440 Watts
- RMS Power: 220 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 88dB
Size:
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
- 12" Subwoofer
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm 2" SVC
- Ferrite Magnet
- 90dB
Love it. Sounds so much better than the stock subwoofer speaker. The only problem I had I thought it would be plug and play. It took me a lot of searching to figure out how to hook it up to my system.
Solid all around product. Price, Installation and Quality Output all outstanding.
Let customers speak for us
from 3835 reviewsI purchased a set of 6.5 and pair of 6x9 and I’m very satisfied ☺️As you say we like it loud is a true statement . I as so want you to know I replace my Ground Zero set up with DS19 thanks 😊

Everything looked awesome, haven't had time to install it yet!

I have two and absolutely I love them.

Perfect fit for my 2018 F150 to replace my center stack speaker on the dash. No amp added for it and it’s pretty loud for what it is. Put DS18 speakers in my old trailblazer and now plan on doing my new to me F150 with DS18 speakers!

PRO 6.5" Neodymium Carbon Fiber Water resistant Cone Mid-Bass Loudspeaker 250 Watts Rms 4-Ohm

Can’t be the price vs quality aspect. Wish they would release a wireless CarPlay version tho.

Well I bought this just to see how much it would push and for how small the amp is that thing has much power it’s a great amp so far just love the power and the way it make my jeep sound

Bought these for my chevy silverado back doors. Sound great. Thinking of getting a pair of 6.5 components to go with them.

Haven’t put them on yet but are wired, waiting on an amp to push 2 pandas and 2 of these. At 2ohms impedance. Thank you !

Great fitting hard hitting sub for my RZR, perfect addition to my sound system.

Great service

ZR 4-Channel Class D Amplifier 4 x 400 Watts Rms @ 4-ohm

Worked great and looking forward to more business with y'all

Loud as I can take
