DS18’s ALL-NEW RZR-RCSUB10LD is here — a 10” bandpass subwoofer enclosure designed to drop straight into the back of your RZR XP or PRO. This system brings clean, deep bass and digital LED lighting to your off-road setup with an easy bolt-in design and trail-proof construction.

Why It’s Different
If you’ve ever tried putting a universal sub box in your RZR, you already know the struggle: it never fits right, it’s hard to secure, and it usually looks out of place. DS18’s RZR-RCSUB10LD is nothing like that.
This easy to install enclosure is made specifically for Polaris RZR XP, PRO XP, Pro R, and Turbo R models. It bolts directly into the rear cargo area, giving you massive bass in a setup that looks factory.
But what really makes this box different?
• It’s coated in rugged black bedliner material so it won’t scratch, fade, or fall apart on the trail.
• It’s got a clear acrylic window so you can show off the sub inside.
• It includes built-in digital LED lighting that you can control with DS18’s LC-DRM module.
• It ships with all mounting brackets and a 5-core wire harness, making install clean and easy.
This upgrade looks right, fits right, and handles the abuse of real off-roading. Most other enclosures on the market TRY to be "universal." This one was made just for your ride.
DS18’s EXL-X10.2D: The Power Within
At the heart of this system is DS18’s EXL-X10.2D subwoofer — a 10” dual 2-ohm beast with 850W RMS / 1700W MAX of pure, clean power. It's tuned to hit hard at 35Hz and roll off smoothly, so your lows never sound sloppy. This sub was made to cut through engine noise, trail bumps, and wide-open wind.
It’s built with:
• A 2.5” black aluminum voice coil
• Dual 90oz ferrite magnets
• A strong, lightweight non-pressed paper cone reinforced with fiberglass
• And a high-efficiency 88.7dB sensitivity to get the most out of every watt
You’re getting competition-grade components in a trail-ready setup — the same sub you'd expect in a show car, now living in the back of your RZR.
Don’t need the box? Just want the boom?
If you’re building another setup and just want that hard-hitting bass, you can grab the EXL-X10.2D subwoofer on its own. Same power, same punch — ready for custom installs.
Get the EXL-X10.2D subwoofer here!
Designed to Handle Anything
This fully engineered subwoofer system was built to survive real world trail abuse. The RZR-RCSUB10LD enclosure is coated in bed-liner textured paint — the same protective finish used on off-road truck beds to guard against scrapes, UV damage, and water intrusion. It houses a sealed digital LED system, protected by a 12mm acrylic window, meaning your lighting setup stays dry, safe, and trail-ready.
Every material was selected for long-term durability, heat resistance, and high-output performance — so it can slam hard without falling apart, even on long rides in rough conditions.
Why It’s Different
The RZR-RCSUB10LD comes prewired with digital LED lighting — but to unlock its full potential, you’ll need DS18’s LC-DRM controller. This small but powerful module puts you in full command of your sub’s built-in RGB lights using the DS18 LC mobile app (available on iOS & Android).
📱 From your phone, you can:
• Power lights on/off
• Change colors with a touch-sensitive color wheel
• Adjust brightness and animation speed
• Sync lights to your music with Music Mode or Mic Mode
• Save your favorite patterns and custom effects
All wirelessly, up to 100 feet away via Bluetooth® 5.4. It’s also IP66 water-resistant, meaning it’s safe for outdoor use and tough enough for trail conditions. If you’re investing in an enclosure this bold, don’t leave the lights stuck on one color — upgrade with the LC-DRM and light it up LOUD!
Shop the LC-DRM Controller
Made to Fit
The RZR-RCSUB10LD is engineered specifically to bolt straight into the rear cargo area of Polaris RZR XP, PRO XP, Pro R, and Turbo R models. It includes custom-fit brackets, screws, and a pre-attached 5-core wire harness for both the subwoofer and digital LED lighting — all designed around your vehicle’s layout for fast and easy installation.
Fits:
• RZR PRO XP / XP4 (All Trims)
• RZR Pro R & Turbo R (2022–Present)
The enclosure uses your existing cargo space and locks in tight using DS18’s provided hardware, so nothing rattles or shifts — even on tough trails. If you ride any of these models, this box was made for your RZR.

Easy Installation
The RZR-RCSUB10LD is designed for easy integration, but it’s not your typical plug-and-play setup. You’ll get everything you need for a clean, professional install — including a 5-core wire harness, mounting brackets, and detailed instructions. The harness carries both subwoofer signal and LED control wiring, minimizing clutter and keeping the setup tight.
You’ll need to connect the system to a compatible amplifier (not included), and if you want to control the lights, pair it with DS18’s LC-DRM controller and app. No cutting, no guesswork — just a few connections and you’re ready to roll.
Once bolted into the cargo area of your RZR XP, PRO XP, Pro R, or Turbo R, the enclosure locks in securely with included hardware to prevent any movement or rattle — even on harsh terrain.
This is a pro-level system made simple. Riders who are ready to wire up an amp and make proper connections will appreciate how clean and trail-ready the setup is out of the box.


Quick Specs Snapshot

• Bandpass enclosure with EXL-X10.2D subwoofer
• 850W RMS / 1700W MAX
• 1-ohm final impedance
• Tuned at 35Hz / -3dB drop at 30Hz
• 92dB sensitivity
• Marine-grade finish + UV protection
• Acrylic viewing window
• 5-core wire harness (sub + LED)
• LED controller module (LC-DRM) sold separately
Conclusion
The DS18 RZR-RCSUB10LD is more than just a subwoofer enclosure; it’s a complete audio upgrade for your Polaris RZR. With its powerful performance, durable construction, and customizable LED lighting, it’s designed to enhance your off-road experience. Whether you’re navigating rugged trails or enjoying a leisurely ride, this subwoofer ensures that you have the best sound quality possible. Don’t settle for mediocre audio — elevate your ride with the DS18 RZR-RCSUB10LD today!





