DS18 ZXI-5254 Glass Fiber Cone 5.25" 2-Way Coaxial Car Speaker 180 Watts 4-Ohm

The ZXI series is the go to DS18 line for great sounding audio that not only has very high volume, but also amazing sound quality for an amazing price. The ZXI-5254 is 5.25" inch, 4 ohm coaxial speaker designed for mid tier audio enthusiasts to the extreme as they have an amazing range of frequencies and loudness. The 2- way design will ensure that you receive a full range of frequencies for an audio experience that you will truly remember.

Highlights

The ZXi line is a complete line of amps, subs, mids, and tweeters so you can match all your equipment up to be the same for an amazing show quality look.
5.25" inch 2- way 4 ohm speaker requiring 60w RMS and 180w Max power handling that gives amazing sound from low to extremely high volume.
2- way design will be sure to give you a full range of frequencies for an amazing audio experience to remember.

2-way coaxial speakers with kevlar cone

Technical Details

Download ZXI-5254 Product Manual

Nominal Diameter	5.25”
Nominal Impedance	4 ohms
RMS Power Handling	60 Watts
MAX Power Handling	180 Watts
Sensitivity (1w/1m)	89dB
Frequency Response	40Hz-20KHz
Recommended HI Pass Crossover	60Hz
Speaker Type	2-Way
Midrange:
Voice Coil Diameter	1” / 25.5mm
Voice Coil Former Material	KSV
Winding Material	EISV
Cone Material	Glass fiber
Surround Material	Rubber
Basket Material	Steel
Magnet Material.	Barium Ferrite
Magnet Weight	10.9 oz / 310g
Tweeter:
Nominal Diameter	1" / 25.4mm
Voice Coil Diameter	0.8" / ø20.4mm
Voice Coil Former Material	KSV
Winding Material	EISVM
Diaphragm Material	PEI
Magnet Material.	Neodymium
Magnet Weight	0.3 oz / 8.5g
Thiele & Small Parameters
Equivalent Volume	4.86L
Excursion (one way)	2.3mm
Free Air Resonance	77Hz
Mechanical Factor	8.39
Electrical Factor	0.87
Total Factor	0.79
Mechanical Mass	9.93g
Mechanical Compliance	457mm/N
BL Factor	4.321
Cone Area	86.5cm2
DC Resistance	3.5 ohm
Mechanical Mass w/o air	9.0g
Measurements
Overall Diameter	5.08” / 129mm
Overall Depth	2.80” / 71mm
Front Mount Baffle Cutout	4.45” / 113mm
Mouting Depth	2.28” / 58mm
Motor Diameter	3.31” / 84mm