- 8” High-Sensitivity Midrange Speaker (100 dB Output)
- 200W RMS / 400W Peak Power Handling
- Neodymium Magnet for Lightweight, High Efficiency
- 100 Hz–17 kHz Frequency Range for Clear Vocals
- Aluminum Basket with High-Performance Voice Coil
- OEM Fit - Direct replacement for PRO-DK175WG & PRO-DKN175WG.
- 1.75” Titanium Build - Durable, high-temp diaphragm for crisp highs.
- Precision Copper Winding - Stable, efficient high-frequency performance.
- Factory-Level Output
- Restores original SPL and clarity
- Custom ABS front door panels that bolt into factory locations for 6th Gen Broncos
- High-Output 6.5" Neodymium Full Range Bullet Loudspeaker
- Crisp High-Compression 3.6" Neodymium Hybrid Driver/Tweeter
- Aluminum bullet and basket
- All-Weather, Trail-Ready Build
- Custom ABS rear door panels that bolt into factory locations for 6th Gen Broncos
- High-Output 6.5" Coaxial Hybrid Midrange Loudspeaker with Built-in Driver
- Neodymium Driver Magnet / Ferrite Woofer Magnet
- For 4 Door Models Only
- All-Weather, Trail-Ready Build
- High-Output Multi-Speaker Configuration - 4x 8" Coaxial Midrange Loudspeakers, 2x 6.5" Coaxial Midrange Loudspeakers, 2x 3.6" Super Neodymium Tweeters
- Vehicle-Specific Fitment for 4-Door 6th Gen Bronco
- Complete, Amplifier-Matched System
- Extreme High-Frequency Clarity
- Built for Open-Air Performance
- 20 ft length ideal for large vehicles and remote amp installs
- 100% OFC wiring for clean, noise-free signal transfer
- Ultra Flex jacket for easy routing in tight spaces
- Dual male RCA connectors with secure locking fit
- 10 pack ideal for multi-amp and full system builds
- 8" Mid-Range Loudspeaker
- RMS Power: 400 Watts
- Impedance: 4 Ohm
- Neodymium Magnet
- IP65 Water-Resistant
- Paper Cone with Water-Resistand Coat
- 7.7" 2-Way Coaxial Marine Speaker
- RMS Power: 175 Watts
- Impedance: 4 Ohm ~ 96dB
- Digital LED Lighting / White Deck LED ~ IP65
- Ferrite & Neodymium Magnets
- Pair ~ Silicone Speaker Covers Included
- All-in-One Bass Package
- Deep Low-End Power
- High-Efficiency Class D Amplifier
- Easy Factory-Ready Install
- Reliable Performance Kit
- 6x9" Hybrid Loudspeaker
- RMS Power: 200 Watts
- Impedance: 4 Ohm
- Neodymium Magnet
- IP65 Water-Resistant
- Glass Fiber Cone + Foam Composite with Resin Finish
- 6.5" Hybrid Loudspeaker
- RMS Power: 250 Watts
- Impedance: 4 Ohm
- Neodymium Magnet
- IP65 Water-Resistant
- Glass Fiber Cone + Foam Composite with Resin Finish
- 6.5" Full-Range Speaker
- RMS Power: 250 Watts
- Impedance: 2 Ohm
- Neodymium Magnet
- IP65 Water-Resistant
- Glass Fiber Cone + Foam Composite with Resin Finish
- Digital LED Ring
- Water Resistant
- Easy Install
- Sealed Acrylic
- Lighting Effects Controlled via DS18’s LC-DRM Bluetooth module
- 10" Marine Subwoofer
- RMS Power: 600 Watts (1200 Watts Peak)
- Impedance: 4 Ohm 3" SVC
- Digital LED Lights
- Neodymium Magnet ~ 85dB
- Water Resistant IP65
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Phenolic Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PH.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Phenolic Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PH.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Neodymium Magnet - Polyimide Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PY.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Titanium Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22TI.8VC
- 2" Compression Driver
- RMS Power: 250 Watts(1000 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Neodymium Magnet
- Titanium Diaphragm
- Bolt On
- Re Cone Kit
- For 10XL1400MB-8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For 10XL1400MB-4
- Impedance: 4 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For PRO-3KP12.4
- Impedance: 4 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- 10" Empty Marine Tower
- Grill, Clamp, and Wires Included
- Built In Passive Radiator
- RGB LED Lights
- Water Resistant IP65
- Single Piece
- Re Cone Kit
- For PRO-1.5KP12.8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- 5x7" Full-Range w/Bullet
- MAX Power: 450 Watts
- RMS Power: 225 Watts
- Impedance: 4 Ohm
- Neodymium Magnet
- 97.6dB
- Custom Fit for Chevy/GMC and Ford Crew Cabs
- Designed for Four 8” Subwoofers
- Under Rear Seat Design Saves Cabin Space
- Front-Fire Ported Design for Enhanced Bass Output
- Durable Black Bed Liner Finish
- Designed for 2-door and 4-door Polaris RZR-PRO models from 2020-2024
- Loaded with NXL-IQ6/BK coaxial speakers - 150W RMS / 300W MAX
- Digital LED Lighting
- IP65 Water Resistant
- OEM-Style Fit & Finish
- RCA 2 Channel Pack 10 pieces
- 20 Feet
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- Made for Polaris Slingshot 2020-Up – OEM-style
- Includes NXL-IQ8/BK speakers and PRO-TW1LD super bullet tweeters
- Powerful 8” Speaker Output – 175W RMS / 350W MAX
- Crystal-Clear Highs Tweeteres – 60W RMS / 120W MAX
- Digital LED Lights - Pair (L&R)
- Water-Resistant IP65
- 8” Marine and Powersports Audio – 350W RMS / 700W MAX
- Neodymium Magnet – Strong performance with lighter weight
- IP65 Rated Build – Water-resistant and UV protected
- Digital LED Lights – LC app control with LC-DRM (sold separately)
- 360° Adjustable Mount – Flexible positioning and clean install
- Fits 2014-2018 RZR-XP - Custom under-dash
- NXL Amplifier Ready - Compatible with select DS18 NXL amplifiers
- Space-Saving Design
- Durable Metal Build
- Off-Road Audio Upgrade
- Fits 2007-2018 Jeep Wrangler JKU models
- Complete door, dashboard, soundbar, and rear bass upgrade
- Includes front and rear door panels with speakers and tweeters
- Dashboard speaker system with OEM-style tweeter integration
- Loaded soundbar with 8” speakers, tweeters, and RGB LED lighting
- Rear wheel well bass enclosure with dual 12” subwoofers
- Includes Class D amplifiers for full-system power
- Comes with wiring kits, speaker wire, LOC, and RGB Bluetooth controller
- Built for loud, clear, full-range Jeep audio performance
- Fits 2017+ Can-Am Maverick X3s with Smart-Lok
- Relocates the Smart-Lok module for easier placement
- Helps reduce steering interference from Smart-Lok placement
- Creates room for amplifier installation
- Black ABS plate with included screws
- Fits 4-Door 2020-2024 Polaris RZR-PRO
- Loaded with NXL-IQ8/BK 8" 2-Way Coaxial Speakers
- 175W RMS / 350W MAX Power Handling
- Digital LED Lighting for Custom Style
- IP65-Rated Water-Resistant Polyethylene Panels
- Loaded with NXL-IQ8/BK 8” Coaxial Speakers
- Fits 2020–2024 Polaris RZR-PRO Models
- 175W RMS / 350W MAX Power Handling
- IP65 Water-Resistant Polyethylene Panels
- Digital LED Lighting with LC App Control
- OEM-Fit for Can-Am X3 (2017+)
- Loaded with NXL-IQ6/BK 6.5” Coaxial Speakers
- 150W RMS / 300W Max - Digital LED Lights
- Durable & Weather-Resistant IP65
- Factory-Style Finish
- OEM-Fit for Can-Am X3 (2017+)
- Loaded with NXL-IQ6/BK 6.5” Coaxial Speakers
- 150W RMS / 300W Max - Digital LED Lights
- Durable & Weather-Resistant IP65
- Factory-Style Finish
- Precision-engineered for Can-Am Maverick X3 2-door and 4-door (2017+)
- Loaded - Includes (2) NXL-IQ6/BK - 150W RMS / 300W Max
- IP65 Water-Resistant Build
- Customizable LED Lighting
- OEM-style fit - Wiring Included
- Precision-designed for 2020+ Polaris RZR Pro
- Includes (2) 6.5” Marine Speakers and (2) Super Bullet Tweeters
- Plug-and-Play Installation
- Integrated LED Lighting
- Marine-Grade Durability (IP65 Rated)
- RCA 2 Channel Pack 10 pieces
- 3 Feet
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- RCA 2 Channel Pack 10 pieces
- 12 Feet
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- 375W RMS / 750W Max Power / 97.5dB Sensitivity
- Midrange Coaxial Design
- Neodymium Ring Motor
- Conical Paper Cone with Cloth Surround
- Perfect for Pro Audio and Motorcycle Builds
- Seamless Factory Fit - Front Door Maverick X3 / 2020-Up 2 & 4 Door models
- Complete Plug-and-Play Setup
- Pre-loaded with NXL-IQ6/BK 6.5" coaxial speakers
- Dual LED Illumination
- All-Elements Ready
- Direct-Fit Tailgate Enclosure - Designed specifically for 6th Gen Ford Bronco
- 12" Shallow Subwoofer - 800W RMS / 1600W Max
- High-Power Monoblock Amplifier with remote level knob
- Water-resistant ABS enclosure
- Integrated RGB grille
- Vehicle-specific clamps designed for 6th Gen Ford Bronco OEM roll bars
- High output 8” tower speakers 180W RMS / 550W MAX with passive radiator for deeper bass
- 360° adjustable mounting for perfect sound direction
- Integrated RGB LED lighting with app control-ready design
- Includes DS18 ION700.2D micro amplifier
- Marine-grade, waterproof, and off-road-ready construction
- Vehicle-specific clamps designed for 6th Gen Ford Bronco OEM roll bars
- High output 8” tower speakers 180W RMS / 550W MAX with passive radiator for deeper bass
- 360° adjustable mounting for perfect sound direction
- Integrated RGB LED lighting with app control-ready design
- Includes DS18 ION700.2D micro amplifier
- Marine-grade, waterproof, and off-road-ready construction
- Vehicle-specific clamps designed for 6th Gen Ford Bronco OEM roll bars
- High output 8” tower speakers 180W RMS / 550W MAX with passive radiator for deeper bass
- 360° adjustable mounting for perfect sound direction
- Integrated RGB LED lighting with app control-ready design
- Includes DS18 ION700.2D micro amplifier
- Marine-grade, waterproof, and off-road-ready construction
- Vehicle-specific clamps designed for 6th Gen Ford Bronco OEM roll bars
- High output 8” tower speakers 180W RMS / 550W MAX with passive radiator for deeper bass
- 360° adjustable mounting for perfect sound direction
- Integrated RGB LED lighting with app control-ready design
- Includes DS18 ION700.2D micro amplifier
- Marine-grade, waterproof, and off-road-ready construction
- Vehicle-specific clamps designed for 6th Gen Ford Bronco OEM roll bars
- High output 8” tower speakers 180W RMS / 550W MAX with passive radiator for deeper bass
- 360° adjustable mounting for perfect sound direction
- Integrated RGB LED lighting with app control-ready design
- Includes DS18 ION700.2D micro amplifier
- Marine-grade, waterproof, and off-road-ready construction
- Exclusive Loaded Subwoofer Package
- Ford F150/ F250/F350(17-24)
- Under Rear Seat 4 Door ~ Front Fire
- 4 X 8" Subwoofers
- 1 X 1 Channel Mono Block Subwoofer Amplifier
- 1 X Amp Kit
- 1 X Digital LED Lights Controller
- Re Cone Kit
- For 10XL1400-8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For HOOL-X12.4DHE
- Impedance: 4 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single












































































































































































































































