- 8" 2-Way Hybrid Coaxial Marine Speaker
- RMS Power: 200 Watts
- Impedance: 4 Ohm ~ 99dB
- Neodymium Magnet
- Digital LED Lighting ~ IP65
- Black ~ Pair ~ Silicone Speaker Covers
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Neodymium Magnet - Polyimide Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PY.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Phenolic Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PH.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Neodymium Magnet - Polyimide Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PY.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Titanium Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22TI.8VC
- Marine Flat Mounting Bracket
- Specially Made for Malibu Boats
- For NXL-X ~ CF-X Series Towers
- 30° Adjustable Tilt
- Die-Cast Kirksite
- Black / White ~ Single
- Re Cone Kit
- For 10XL1400MB-8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For HOOL-X12.4DHE
- Impedance: 4 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For HOOL-X12.2DHE
- Impedance: 2 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For PRO-3KP12.4
- Impedance: 4 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Fits 2017+ Can-Am Maverick X3s with Smart-Lok
- Relocates the Smart-Lok module for easier placement
- Helps reduce steering interference from Smart-Lok placement
- Creates room for amplifier installation
- Black ABS plate with included screws
- Precision Fit for Jeep JL/JLU/JT Front Doors Long Armrest
- Premium Audio Upgrade
- Rugged Off-Road Durability
- Slim Profile for Easy Installation
- Dynamic Custom LED Lighting System
- Complete Jeep Gladiator Audio Kit – JT-TUBE + 4x 8” Tower speakers
- Loud Off-Road Sound System – 180W RMS / 550W Max
- OEM Fit, Easy Install – Uses factory Jeep JT mounting points
- Expandable Speaker Setup – Supports up to 8 tower speakers
- RGB LED Tower Speakers – Waterproof with Bluetooth lighting control
- Complete Jeep Gladiator Audio Kit – JT-TUBE + 4x 8” Tower speakers
- Loud Off-Road Sound System – 180W RMS / 550W Max
- OEM Fit, Easy Install – Uses factory Jeep JT mounting points
- Expandable Speaker Setup – Supports up to 8 tower speakers
- RGB LED Tower Speakers – Waterproof with Bluetooth lighting control
- Complete Jeep Gladiator Audio Kit – JT-TUBE + 4x 8” Tower speakers
- Loud Off-Road Sound System – 180W RMS / 550W Max
- OEM Fit, Easy Install – Uses factory Jeep JT mounting points
- Expandable Speaker Setup – Supports up to 8 tower speakers
- RGB LED Tower Speakers – Waterproof with Bluetooth lighting control
- Complete Jeep Gladiator Audio Kit – JT-TUBE + 4x 8” Tower speakers
- Loud Off-Road Sound System – 180W RMS / 550W Max
- OEM Fit, Easy Install – Uses factory Jeep JT mounting points
- Expandable Speaker Setup – Supports up to 8 tower speakers
- RGB LED Tower Speakers – Waterproof with Bluetooth lighting control
- Complete Jeep Gladiator Audio Kit – JT-TUBE + 4x 8” Tower speakers
- Loud Off-Road Sound System – 180W RMS / 550W Max
- OEM Fit, Easy Install – Uses factory Jeep JT mounting points
- Expandable Speaker Setup – Supports up to 8 tower speakers
- RGB LED Tower Speakers – Waterproof with Bluetooth lighting control
- 600W RMS Power Handling
- Marine-Grade Durability (IP65 Rated)
- Digital LED Lighting
- Hybrid Magnet Motor (Ferrite main magnet and reverse neodymium magnet)
- Silicone Cover Included / Removable Grille Design
- Aluminum Basket
- 500W RMS Power Handling
- Marine-Grade Durability (IP65 Rated)
- Digital LED Lighting
- Hybrid Magnet Motor (Ferrite main magnet and reverse neodymium magnet)
- Silicone Cover Included / Removable Grille Design
- Aluminum Basket
- OEM-Fit for Can-Am X3 (2017+)
- Loaded with NXL-IQ6/BK 6.5” Coaxial Speakers
- 150W RMS / 300W Max - Digital LED Lights
- Durable & Weather-Resistant IP65
- Factory-Style Finish
- OEM-Fit for Can-Am X3 (2017+)
- Loaded with NXL-IQ6/BK 6.5” Coaxial Speakers
- 150W RMS / 300W Max - Digital LED Lights
- Durable & Weather-Resistant IP65
- Factory-Style Finish
- 6.5” High-Sensitivity Midrange Speaker (103 dB Output)
- 250W RMS / 500W Peak Power Handling
- Neodymium Magnet for Lightweight, High Efficiency
- 120 Hz–17 kHz Frequency Range for Clear Vocals
- Aluminum Basket with High-Performance Voice Coil
- Precision-engineered for Can-Am Maverick X3 2-door and 4-door (2017+)
- Loaded - Includes (2) NXL-IQ6/BK - 150W RMS / 300W Max
- IP65 Water-Resistant Build
- Customizable LED Lighting
- Plug-and-Play Wiring Included
- RCA 2 Channel Pack 10 pieces
- 3 Feet
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- RCA 2 Channel Pack 10 pieces
- 12 Feet
- Ultra Flex
- 100% Copper OFC
- Double Twisted Wire
- Red Braided Jacket
- 375W RMS / 750W Max Power / 97.5dB Sensitivity
- Midrange Coaxial Design
- Neodymium Ring Motor
- Conical Paper Cone with Cloth Surround
- Perfect for Pro Audio and Motorcycle Builds
- Seamless Factory Fit - Front Doors Maverick X3 / 2020-Up 2 & 4 Door models
- LED Accent Lighting
- All-Elements Ready
- Easy Installation
- 6.5" Speaker Ready
- Extreme SPL Output - 90W AES, 180W Program, 360W Peak
- Cut-Through-the-Noise Clarity - Titanium diaphragm
- Wide-Throw Sound Control - 140° horizontal dispersion
- High-Efficiency - 101dB Sensitivity
- Perfect for Loud Setups
- 600W RMS Power – Delivers clean, powerful bass with authority
- Dual 4-Ohm Coils – Easy wiring and system flexibility
- Carbon Fiber Dust Cap – Stronger cone with aggressive styling
- Sealed or Ported Use – Tight or loud bass on demand
- Rugged Construction – Engineered for long-term daily use and reliability
- 8” 2-Way Marine-Grade Coaxial Speaker
- IP65 Water & UV Resistant Construction
- Floating Bullet Tweeter with Neodymium Magnet
- Digital LED Ring (LC-DRM Compatible)
- Flush-Mount Magnetic Grille for Clean Install
- 6.5” 2-Way Marine-Grade Coaxial Speaker
- IP65 Water & UV Resistant Construction
- Floating Bullet Tweeter with Neodymium Magnet
- Digital LED Ring (LC-DRM Compatible)
- Flush-Mount Magnetic Grille for Clean Install
- 8" 2-Way Marine Tower
- Built-in passive radiator & 1" Driver
- RMS Power: 200 Watts
- Impedance: 4-Ohm
- Neodymium Magnet ~ Digital LED Light & White Dome Light
- Water Resistant IP65 - UV Stable
- 7” Soft Dome Midrange with 4" KSV Voice Coil
- 200W AES / 400W Program / 500W Peak Power
- 96dB Sensitivity and 350Hz–9KHz Frequency Range
- Neodymium Magnet with Aluminum Enclosure
- Large Tuned Rear Chamber for Clean Output
- Perfect for Studio Monitors or High-End Car Audio
- Complete Recone Kit
- For EXL-TR15.4D Subwoofer
- Impedance: 4-Ohm DVC
- Cone, Dust Cap, Spider, and Voice Coil
- Easy Replacement
- Single
- Fits: 2 x 12" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- Neodymium compression driver with CNC aluminum horn for crisp highs
- Waterproof and UV-protected for all-weather durability IP65
- Removable Stainless Steel Grill
- Vibrant RGB Lighting
- Speaker covers included
- 6.5" 2-Way Coaxial Marine Speaker
- RMS Power: 200 Watts
- Impedance: 4 Ohm ~ 98dB
- Neodymium Magnets
- Digital LED Lighting ~ IP65
- Black ~ Pair ~ Silicone Speaker Covers
- 8" 2-Way Hybrid Coaxial Marine Speaker
- RMS Power: 200 Watts
- Impedance: 4 Ohm ~ 99dB
- Neodymium Magnet
- Digital LED Lighting ~ IP65
- White ~ Pair ~ Silicone Speaker Covers
- 12" Marine Subwoofer
- RMS Power: 800 Watts (1600 Watts Peak)
- Impedance: 4 Ohm 3" SVC
- Digital LED Lights
- Neodymium Magnet ~ 87dB
- Water Resistant IP65
- 10" Marine Subwoofer
- RMS Power: 600 Watts (1200 Watts Peak)
- Impedance: 4 Ohm 3" SVC
- Digital LED Lights
- Neodymium Magnet ~ 85dB
- Water Resistant IP65
- Heavy-Duty Speaker Enclosure
- Powerful 2-Channel Amplifier
- High-Output Marine Speakers
- Seamless CAN-AM Fit
- Digital LED Light Controller
- Trail-Ready Wiring
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Phenolic Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PH.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Phenolic Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PH.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 109dB
- Neodymium Magnet - Polyimide Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22PY.8VC
- 2" Compression Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm ~ 111dB
- Neodymium Magnet - Titanium Diaphragm
- Bolt On
- Easily Repaired With The PRO-DN22TI.8VC
- 2" Mid-Range Compression Driver
- RMS Power: 220 Watts(440 Watts Peak)
- Impedance: 8 Ohm ~ 120dB
- Neodymium Magnet - Polyester Diaphragm
- Bolt On
- Easily Repaired With The PRO-DRNMSVC
- Marine Flat Mounting Bracket
- Specially Made for Malibu Boats
- For NXL-X ~ CF-X Series Towers
- 30° Adjustable Tilt
- Die-Cast Kirksite
- White ~ Single
- Tool Kit
- 11 Piece Plastic Pry Tools
- 4 Piece Plastic Fastener Removal Tools
- 7 Piece Radio Removal Tools
- 3 Piece Plug Pins Removal Tools
- Zippered Storage Case with Logo
- Loaded Ported Loudspeaker Enclosure
- 2 X 12" ~ PRO-1.5KP12.2
- RMS Power: 3000 Watts(6000 Watts Peak)
- Impedance: 2+2 Ohm
- 3/4" MDF with Black Carpet
- 97dB
- Loaded Ported Loudspeaker Enclosure
- 1 X 10" ~ PRO-1.5KP10.4
- RMS Power: 1500 Watts(3000 Watts Peak)
- Impedance: 4 Ohm
- 3/4" MDF with Black Carpet
- 94.5dB
- Re Cone Kit
- For PRO-NEO8R
- Impedance: 4 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single































































































































































































