- CAN-AM X3 (2017-2023) Stage 3 Package
- 1 X CA-X3DS6LDV2 Pair (R&L) / 1 X RKS-BT
- 1 X CA-X3BASS/D / 1 X CA-X3BASS/P
- 1 X NXL-X1000.1D / 1 X NXL-X360.2D
- 1 X MOFCKIT4 / 1 X MOFCKIT8 / 1 X LC-DRM
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2023) Stage 1 Package
- 1 X CA-X3DS6LDV2 Pair (R&L)
- 1 X NXL-X360.2D
- 1 X RKS-BT
- 1 X LC-DRM / 1 X MOFCKIT8
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2023) Stage 2 Package
- 1 X CA-X3DS6LDV2 Pair (R&L)
- 1 X CA-X3BASS/D
- 1 X NXL-X1200.5D / 1 X RKS-BT
- 1 X MOFCKIT4 / 1 X LC-DRM
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2023) Stage 3 Package
- 1 X CA-X3DS6LDV2 Pair (R&L) / 1 X RKS-BT
- 1 X CA-X3BASS/D / 1 X CA-X3BASS/P
- 1 X NXL-X1000.1D / 1 X NXL-X360.2D
- 1 X MOFCKIT4 / 1 X MOFCKIT8 / 1 X LC-DRM
- OEM FIT / Water Resistant
- CAN-AM X3 (2017-2023) Stage 4 Package
- 1 X CA-X3DS6LDV2 / 1 X MXRC-BT / 1 X NXL-X8PRO/BK
- 1 X CA-X3BASS/D / 1 X CA-X3BASS/P
- 1 X NXL-X1000.1D / 1 X NXL-X600.4D
- 1 X MOFCKIT4 / 1 X MOFCKIT8 / 1 X LC-DRM
- OEM FIT / Water Resistant
- 2" Replacement Diaphragm
- Polyimide
- Impedance: 8 Ohm
- For: PRO-D22PY.8
- Single
- 3.5" Replacement Diaphragm
- Polymer
- Impedance: 8 Ohm
- For: PRO-DRNMD
- Single
- Chevrolet Suburban Good Package
- 2015 - 2020
- 2 X 6.5" 2 WAY Speakers
- 2 X 6X9" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- Re Cone Kit
- For HOOL-X12.4DHE
- Impedance: 4 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For HOOL-X12.2DHE
- Impedance: 2 Ohm DVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Re Cone Kit
- For PRO--XLNEO10MB
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
- Toyota RAV4 Better Package
- 2014 - 2018
- 2 X 3.5" Tweeters
- 4 X 6.5" 2 WAY Speakers
- 1 X 4 Channel Amplifier
- 1 X AMP KIT
- 3.5" Replacement Diaphragm
- 1.75" Replacement Diaphragm
- Polyester
- Impedance: 8 Ohm
- For: PRO-DRNCOAX
- Single
- Loudspeaker Horn Diffuser Horn
- 10"
- RGB LED Lights
- Bolt on Installation
- Mounting Hardware Included
- Clear ABS
- LED Headlights
- CSP LED Chip ~ IP65
- Unique Blade Head Design
- Super Canbus Built In
- 6500K Color Temperature
- 5000 LM Low Beam~30 Watts
- 3" Replacement Diaphragm
- Titanium
- Impedance: 8 Ohm
- For: PRO-DRNEO
- Single
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 1" Titanium Voice Coil for ultra-clean, high-volume treble
- Compact 3" Super Bullet Tweeter with lightweight neodymium magnet
- High Power Handling: 60W AES, 120W program, 240W peak
- Ultra-Slim Fit: 1.46" mounting depth for versatile custom installs
- Wide Frequency Range from 650Hz–20kHz for crisp mid-high and high-frequency coverage
- 3" Compression Super Bullet Tweeter
- RMS Power: 120 Watts(240 Watts Peak)
- Impedance: 4 Ohm ~ 98dB
- Flush Mount with Grill
- Neodymium Magnet
- Easily Repaired With The GTX1VC
- 3.75" Compression Super Bullet Tweeter
- RMS Power: 160 Watts(320 Watts Peak)
- Impedance: 4 Ohm ~ 100dB
- Flush Mount with Grill
- Neodymium Magnet
- Easily Repaired With The GTX1XLVC
- Re Cone Kit
- For EXL-TR12.4D
- Impedance: 4-Ohm DVC
- Cone, Dust Cap and Voice Coil
- Easy Replacement
- Single
- Complete Recone Kit
- For 10PRO1200MB-8 Mid-Bass
- Impedance: 8-Ohm DVC
- Cone, Dust Cap, Spider, and Voice Coil
- Easy Replacement
- Single
- Complete Recone Kit
- For EXL-TR15.4D Subwoofer
- Impedance: 4-Ohm DVC
- Cone, Dust Cap, Spider, and Voice Coil
- Easy Replacement
- Single
- Complete Recone Kit
- For EXL-TRX12.4D Subwoofer
- Impedance: 4-Ohm DVC
- Cone, Dust Cap, Spider, and Voice Coil
- Easy Replacement
- Single
- Perfect fit for Harley-Davidson saddlebags 2014-2023
- Easy install for 10" subwoofers
- Durable CNC-cut ABS construction
- Paintable surface for custom finishes
- Pair
- Perfect fit for Harley-Davidson saddlebags
- Adds 1/2" mounting depth for perfect speaker clearance and optimized sound alignment
- Easy install for 6.5" speakers
- Durable CNC-cut ABS construction
- Paintable surface for custom finishes
- Perfect fit for Harley-Davidson saddlebags
- Adds 1/2" mounting depth for perfect speaker clearance and optimized sound alignment
- Easy install for 8" speakers
- Durable CNC-cut ABS construction
- Paintable surface for custom finishes
- Perfect fit for Harley-Davidson saddlebags 2014-2023
- Easy install for 10" subwoofers
- Durable CNC-cut ABS construction
- Paintable surface for custom finishes
- Pair
- 8" Slim Midrange Speaker 400W MAX / 200W RMS
- 4-Ohm Impedance for Full Amplifier Output
- Carbon Fiber Cone and Dust Cap – Fully Water-Resistant IP65
- Shallow 2.5" Mounting Depth for Tight Spaces
- Lightweight Neodymium Magnet with High 95dB Sensitivity
- 6.5" Shallow Loudspeaker
- Water Resistant Carbon Fiber Cone
- Demodulating Rings
- Neodymium Magnet
- Impedance: 4-Ohm
- 93dB Sensitivity
- 8" Slim Midrange Speaker 400W MAX / 200W RMS
- 4-Ohm Impedance for Full Amplifier Output
- Carbon Fiber Cone and Dust Cap – Fully Water-Resistant IP65
- Shallow 2.5" Mounting Depth for Tight Spaces
- Lightweight Neodymium Magnet with High 95dB Sensitivity
- 6.5" Shallow Loudspeaker
- Water Resistant Carbon Fiber Cone
- RMS Power: 150 Watts (300 Watts Peak)
- Impedance: 2-Ohm
- Neodymium Magnet
- 93dB
- 8" Slim Midrange Speaker 400W MAX / 200W RMS
- 2-Ohm Impedance for Full Amplifier Output
- Carbon Fiber Cone and Dust Cap – Fully Water-Resistant IP65
- Shallow 2.5" Mounting Depth for Tight Spaces
- Lightweight Neodymium Magnet with High 95dB Sensitivity
- Fits: 2 x 12" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Fits: 2 x 12" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Fits: 2 x 8” Midrange Speakers
- Fits: 2 x 4” Tweeters
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Fits: 2 x 10" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- 2x 8” PRO-X8M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 550W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- 2x 10” PRO-X10M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 600W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- Fits: 2 x 8” Midrange Speakers
- Fits: 2 x 4” Tweeters
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- 2x 8” PRO-X8M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 550W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- Fits: 2 x 8” Midrange Speakers
- Fits: 2 x 4” Tweeters
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- 2x 10” PRO-X10M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 600W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- Fits: 2 x 10" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Fits: 2 x 12" Midrange Speakers
- Fits: 2 x 4" Tweeters
- Fits: 1 x 2" Driver
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- Fits Most 10” DS18 Subwoofers (sold separately)
- Easy to Install - All Hardware and Wiring Included
- OFC-Tinned 12Ga Wiring for More Power Handling
- Fits Slingshot Models from 2015 or Later
- Works for Both the Driver and/or Passenger Side
- Black Bed Liner Paint Finish
- Includes EXL-X10.4D 10” Subwoofer
- 850W RMS / 1700W MAX Power Handling
- OEM-Fit for Polaris Slingshot 2015 and Newer
- Compatible with Driver or Passenger Side Install
- Sealed Enclosure Tuned for Tight, Responsive Bass
- Includes All Mounting Brackets and OFC-Tinned 6-Core Wiring
- Fits Most 10” DS18 Subwoofers (sold separately)
- Easy to Install - All Hardware and Wiring Included
- OFC-Tinned 12Ga Wiring for More Power Handling
- Fits Slingshot Models from 2015 or Later
- Works for Both the Driver and/or Passenger Side
- Black Bed Liner Paint Finish
- All-in-One Bass Package
- Deep Low-End Power
- High-Efficiency Class D Amplifier
- Easy Factory-Ready Install
- Reliable Performance Kit
- Complete Upgrade Kit
- Powerful Bass
- Crystal-Clear Sound
- All-in-One Installation
- High-Power Amplifier
- Complete Upgrade Kit
- Premium Sound Quality
- High-Efficiency Power
- Factory Fit Install
- Daily Driver Ready
- Pre-loomed 8-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH6 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH6 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH6 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- 10" Mid-Range W/Bullet
- MAX Power: 500 Watts
- RMS Power: 250 Watts
- Impedance: 4-Ohm
- Neodymium Magnet
- Shallow ~ 97dB
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 4 Channel Stereo Full Range
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 300 Watts @ 4 Ohm
- Power ~ Clip ~ Protect Indicators
- Made In Korea ~ Bass Knob
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 5000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
-$360.00 instant savings
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 8000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 4 Channel Stereo Full Range
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 300 Watts @ 4 Ohm
- Power ~ Clip ~ Protect Indicators
- Made In Korea ~ Bass Knob
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 5000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 8000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 4 Channel Stereo Full Range
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 300 Watts @ 4 Ohm
- Power ~ Clip ~ Protect Indicators
- Made In Korea ~ Bass Knob
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 5000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
-$360.00 instant savings
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 8000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 10000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 4 Channel Stereo Full Range
- Class D
- 2 ~ 4 Ohm Stable
- 4 X 300 Watts @ 4 Ohm
- Power ~ Clip ~ Protect Indicators
- Made In Korea ~ Bass Knob
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 5000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
- 1 Channel Subwoofer Monoblock
- Class D
- 0.5 ~ 4 Ohm Stable
- 1 x 8000 Watts @ 1 Ohm
- Bass Knob/Voltmeter/Clip Indicator
- Made In Korea
Sold out
- Re Cone Kit
- For 6OCT300-8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
Sold out
- Better Marine Audio Package
- 1 X MP.4A
- 1 X MXRC-BT
- 2 X MP4
- 1 X HQMP3DUALRCA3FT
- White ~ Black
Sold out
- 8" Hybrid Mid-Bass w/Coaxial Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 4-Ohm(W)/8-Ohm(D)
- Neodymium Magnets
- Water Resistant Carbon Fiber Cone
- 105dB
Sold out
- 8" Hybrid Mid-Bass w/Coaxial Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 4-Ohm(W)/8-Ohm(D)
- Neodymium Magnets
- Water Resistant Carbon Fiber Cone
- 105dB
- 8" Hybrid Mid-Bass w/Coaxial Driver
- RMS Power: 400 Watts(800 Watts Peak)
- Impedance: 8 Ohm(W) 8 Ohm(D)
- Neodymium Magnet
- Water Resistant Carbon Fiber Cone
- 105dB
Sold out
Sold out
- LED Headlights
- CSP LED Chip ~ IP67
- External Ballast
- Super Canbus Built In
- 6000K Color Temperature
- 10,000 LM - 100 Watts Low Beam
Sold out
- LED Headlights
- CSP LED Chip ~ External Ballast
- Super Canbus Built In ~ IP67
- 6000K Color Temperature
- 10,000 LM - 100 Watts Low Beam
- 15,000 LM - 150 Watts High Beam
Sold out
Sold out
- 12 Volt AGM Battery
- 9 AMP Hours
- Bolt - A Type Terminals
- Maintenance Free
- 350 Power Watts
- Perfect for Power Sports
Sold out
- 12 Volt AGM Battery
- 12 AMP Hours
- Bolt - A Type Terminals
- Maintenance Free
- 450 Power Watts
- Perfect for Power Sports
Sold out
- Re Cone Kit
- For PRO-FU12.8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
Sold out
- Re Cone Kit
- For PRO-FU8.8
- Impedance: 8 Ohm
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
Sold out
- LED Headlights
- CSP LED Chip ~ IP65
- Unique Blade Head Design
- Super Canbus Built In
- 6500K Color Temperature
- 5000 LM Low Beam~30 Watts
Sold out
Sold out
- Re Cone Kit
- For PRO-BX21N.2
- Impedance: 2 Ohm SVC
- Cone, Dust Cap, Spider and Voice Coil
- Easy Replacement
- Single
Sold out
- 21 " Woofer
- MAX Power: 6000 Watts
- RMS Power: 3000 Watts
- Impedance 2-Ohm SVC
- Neodymium Magnet
- 6" Voice Coil
