DS18 JP6NEO.FR Plug and Play Dash Enclosure Upgrade with 6.5" Neo Full-Range Loudspeaker for Jeep JL/JLU and JT Left and Right

As the most popular manufacturer of professional grade Jeep Audio products, DS18’s expert engineering team is still in search of ways to enhance their previous designs.

Neodymium magnets are the strongest and lightest magnets commercially available today. The JP6NEO.FR is furnished with high strength neodymium midrange speakers, the PRO-FR6NEO, for an expansive covering of the midrange frequencies.

Protected by a high-strength aluminum basket, these speakers are sure to outlast your vehicle. The speakers included with the JP6NEO.FR offer extreme volumes at a lower power requirement than other mid-range loudspeakers. They also come equipped with a Silver Bullet Phase Plug that helps efficiency throughout. These neodymium powerhouses are sure to give crisp clear highs with a power rating of 225 watts RMS and 450 watts MAX power @ 4 Ohms.

This pair of easy to install enclosures come with everything you need to get amazing sound out of your front stage! Plug this enclosure directly into your existing wiring harness, connect directly to your factory amplifier, or add an external amplifier for extreme power and maximum loudness immediately!

Highlights

Plug and Play capabilities for instant installation
Especially designed for Jeep JL, JLU, and JT plug and play installation.
The units use the factory amplifier but alternatively can be powered for even more volume with an external amplifier.
6.5” DS18 Pro-FR6NEO Pro Audio Mid-Range Loudspeaker included for the loudest sound and highest wattage to decibel efficiency 225 watts RMS 450 watts MAX @ 4 Ohms. (pair)
Silver Bullet Resonator (tweeter) that offers the higher range of your NEO bringing you a fuller range of frequencies to blast.

Great For

Jeep Audio

Technical Details

Download JP6NEO.FR Product Manual

General Specifications
Nominal Speaker Diameter		6.5" / 165mm
Nominal Impedance		4 Ohms
RMS Power Handling		225W
MAX Power Handling		450W
Sensitivity (1w/1m)		97dB
Frequency Response		100Hz-16KHz
Recommended HI Pass Crossover		160Hz
Sold in Pair or Single		Pair (Left & Right)

Body / Features
Enclosure Material		ABS Injected Plastic
Wiring / Connections		OEM Plug Connector
Clamps		ABS Factory Location
Finish		Satin Black

Woofer Specifications
Voice Coil Diameter		1.5" / 38.6mm
Voice Coil Former Material		Kapton
Winding Material		CCAW
Cone Material		Non-Pressed Paper
Dust Cap Material		N/A
Bullet Material / Color		Silver Aluminum
Surround Material		Cloth
Basket Material		Aluminum
Magnet Material		Neodymium
Magnet Size / Weight		90x6mm / 7.67 Oz

Thiele & Small Parameters
Equivalent Volume	Vas	2.11L / 0.074ft3
Excursion (one way)	Xmax	6.8mm
Free Air Resonance	Fs	166Hz
Mechanical Factor	Qms	3.173
Electrical Factor	Qes	0.409
Total Factor	Qts	0.362
Mechanical Mass	Mms	11.31g
Mechanical Compliance	Cms	0.08mm/H
BL Factor	BL	9.79
Voice Coil Inductance	Le	0.472mH
Cone Area	Sd	136.85cm2
DC Resistance	Re	3.3 ohm
Mechanical Mass w/o air	Mmd	/

Enclosure Measurement
Overall Length (Left)		7.5" / 190mm
Overall Depth (Left)		7.38" / 187mm
Overall Height (Left)		10.47" / 265mm
Overall Length (Right)		8.18" / 207mm
Overall Depth (Right)		8.14" / 206mm
Overall Height (Right)		9.96" / 252mm