- 6-Channel High-to-Low Conversion
- Selectable Impedance & Input Modes
- Auto Turn-On (Audio / DC / Remote)
- Anodized Aluminum Housing & Noise Protection
- 10Hz–20kHz Frequency Range (<0.01% THD)
- 4x6" Mid-Range w/Bullet
- MAX Power: 200 Watts
- RMS Power: 100 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 90dB
- 5x7" Mid-Range w/Bullet
- MAX Power: 350 Watts
- RMS Power: 175 Watts
- Impedance: 4-Ohm
- Ferrite Magnet
- 94dB
- 2.5" Bullet Tweeter
- RMS Power: 100 Watts
- Impedance: 4 Ohm ~ 102dB
- Neodymium Magnet
- High Sensitivity
- ABS Body
- 2.5" Bullet Tweeter
- RMS Power: 100 Watts
- Impedance: 4 Ohm ~ 102dB
- Neodymium Magnet
- High Sensitivity
- ABS Body
- Fits Harley-Davidson 2014–2023 saddlebag models
- Holds dual 10" speakers per side for massive sound output
- Durable CNC-molded ABS plastic, waterproof and paintable
- Includes templates and dual-ring adapters for a precise fit
- Maximizes saddlebag space without sacrificing storage capacity
- Fits Harley-Davidson 2014–2023 saddlebag models
- Complete Saddlebag Kit – Includes ABS seals and adapters for 10" speakers
- Durable CNC-molded ABS plastic, waterproof and paintable
- Includes templates for a precise fit
- Enhanced Acoustic Performance – Reinforced seals reduce air leaks and improve sound quality
- 2-Channel RCA Outputs
- Remote Turn-On Wire
- Direct Plug & Play Fit
- Off-Road Ready
- For Ride Command Systems
- Dedicated Subwoofer Signal
- Remote Turn-On Wire
- Quick Installation
- Direct Plug & Play Fit
- Off-Road Ready
- Plug & Play Design
- Direct Fitment – Made specifically for Polaris RZR & MRX150
- Factory-Clean Setup
- Reliable Connections
- Trail-Ready Performance
- Plug & Play Design
- Can-Am Ready – Built for Maverick X3 models
- All-in-One Connection – Power, antenna, and speaker outputs
- Secure Fit
- Fast Install
- Perfect Fit – Designed for PRO-TWZ1 and universal 1" tweeters
- Crystal Clear Sound
- Durable Build
- Easy Replacement
- 8-Ohm Compatible
- Perfect Fit: Designed exclusively for the 10XL1000N-N8
- Complete Kit: Includes all replacement parts for a full recone
- Easy Install
- Restore Power
- OEM Quality
- 4-Channel RCA Outputs
- Remote Turn-On Wire
- Direct Plug & Play Fit
- Off-Road Ready
- For Ride Command Systems
- 4” Soft Dome Midrange with 2.5" KSV Voice Coil
- 100W AES : 200W Program : 300W MAX Power Handling
- 450Hz–12KHz Frequency Response for Clean Midrange
- High-Powered Neodymium Motor
- Sealed Aluminum Rear Chamber
- Perfect for Studio Monitors or High-End Car Audio
- 5.25” Soft Dome Midrange with 3" KSV Voice Coil
- 150W AES : 300W Program : 400W MAX
- Wide Frequency Response: 400Hz–10KHz
- Neodymium Magnet & Aluminum Body for Superior Output
- Tuned Rear Chamber for Low Resonance & High Clarity
- Perfect for Studio Monitors or High-End Car Audio
- 7” Soft Dome Midrange with 4" KSV Voice Coil
- 200W AES / 400W Program / 500W Peak Power
- 96dB Sensitivity and 350Hz–9KHz Frequency Range
- Neodymium Magnet with Aluminum Enclosure
- Large Tuned Rear Chamber for Clean Output
- Perfect for Studio Monitors or High-End Car Audio
- 5x7" 2-Way Coaxial
- MAX Power: 400 Watts
- RMS Power: 120 Watts
- Impedance: 3-Ohm
- Barium & Neodymium Magnets
- Pair ~ 90dB
- 4" 2-way coaxial speaker with integrated tweeter
- 40W RMS / 120W MAX power handling
- Frequency range: 80Hz – 20kHz
- ASV/EISV voice coil materials
- Grill included
- Preloaded with EXL-X10.2D 10" Subwoofer
- Wired to 1 Ohm final impedance
- 3/4" MDF construction with acrylic window
- Integrated Digital LED lighting (LC-DRM required)
- 100% UV stable for outdoor use
- Designed for Polaris RZR PRO and XP cargo boxes
- Fits: 2020-Up Jeep Gladiator (OEM Fit)
- Subwoofers Included: 4x 8" DS18 ZR8.2D
- Impedance: 1 Ohm (parallel configuration)
- Sealed ¾” MDF Enclosure
- Internal Volume (Per Chamber): 0.88 ft³ / 25L
- Digital RGB Dream Lighting (12V) – LC-DRM required
- Pre-loomed 4-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 4-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH6 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 8ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 2-door UTV setups
- Pre-loomed 6-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH4 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Pre-loomed 8-GA OFC wiring
- 12ft Power & Ground Cables
- Plug & play terminals
- Waterproof MFH8 fuse holder
- Optimized for DS18 NXL-X amps
- Designed specifically for 4-door UTV setups
- Sealed-back design
- 300W RMS / 600W MAX
- 96dB sensitivity
- 2" fiberglass voice coil with CCAW windings
- Rugged steel basket
- Recommended for dome and diffuser horn
- Compact Sealed Enclosure
- Loaded 10" Shallow-Mount Subwoofer (DS18's IXS10.4D)
- Perfect Fit for Jeep Gladiator & Pickup Trucks
- 2.5" Black Aluminum Voice Coil
- Factory Integration Ready
- Drop-In Build Quality
- Complete Upgrade Kit
- Premium Sound Quality
- High-Efficiency Power
- Factory Fit Install
- Daily Driver Ready
- Complete Coaxial Upgrade Kit
- Powerful Sound Output
- Factory-Fit Installation
- Amplifier Ready
- Perfect for Daily Drivers & Custom Builds
- Sharper Projection - Great for Line Array (LA) Speakers
- Wide 90° Dispersion
- Durable ABS Build
- Bolt-On Design
- Universal Fit
- Pro Sound. Maximim Loudness - 4x 6.5” PRO-ZT6 – 225W RMS
- Integrated Compression Tweeter
- 4-Channel Class D Amplifier
- Direct 6.5” Factory Fit Easy install
- Complete Install Kit Included
- Complete Upgrade Kit
- Easy Install (OEMADAPT)
- Full Range Coaxials (PRO-ZT69 & PRO-ZT6)
- High-Powered Amplifier (G3600.4D)
- Direct fit for Jeep Wrangler JL 2-Door Hardtop (2018–2023)
- CNC-machined stainless steel
- 2” (51mm) tube diameter
- Factory-mount compatible
- Flexible wire routing (Buried or Exposed)
- Gloss black UV-protected finish
- All-in-One Bass Package
- Deep Low-End Power
- High-Efficiency Class D Amplifier
- Easy Factory-Ready Install
- Reliable Performance Kit
- Dual 12” High Excursion Subs
- Powerful Monoblock Amp
- Complete Install Kit Included
- Engineered for Daily Use
- Perfectly Matched System
- All-in-one active 10" subwoofer enclosure
- 350W RMS / 700W MAX power ratings
- Built-in Class D monoblock amplifier (2-ohm stable)
- Auto turn-on with high-level input (no REM wire needed)
- Frequency response: 30–250Hz
- Quick-connect terminal for fast, clean installation and easy removal of the enclosure
- 10” Sealed Subwoofer Enclosure for Pickup Trucks
- 350W RMS / 700W MAX Power Handling
- Frequency Response: 30–250Hz
- Impedance 2-Ohm
- Compact Sealed Box: 13L / 0.48ft³ Internal Volume
- Built with 5/8” MDF and Black Carpet Finish
- 10” Subwoofer Paired with 10” Passive Radiator
- 350W RMS / 700W MAX Power Handling
- Impedance 2-Ohm
- Compact Sealed Box: 0.56ft³ Internal Volume
- Frequency Response: 30–250Hz, -3dB Drop at 45Hz
- Built with 5/8” MDF and Black Carpet Finish
- Includes EXL-X10.4D 10” Subwoofer
- 850W RMS / 1700W MAX Power Handling
- OEM-Fit for Polaris Slingshot 2015 and Newer
- Compatible with Driver or Passenger Side Install
- Sealed Enclosure Tuned for Tight, Responsive Bass
- Includes All Mounting Brackets and OFC-Tinned 6-Core Wiring
- Fits Most 10” DS18 Subwoofers (sold separately)
- Easy to Install - All Hardware and Wiring Included
- OFC-Tinned 12Ga Wiring for More Power Handling
- Fits Slingshot Models from 2015 or Later
- Works for Both the Driver and/or Passenger Side
- Black Bed Liner Paint Finish
- Fits: 2 x 8” Midrange Speakers
- Fits: 2 x 4” Tweeters
- Enclosure Type: Ported
- Material: ½” MDF with Black Carpet
- Includes: Speakon terminal + 12ft OFC 4-conductor Speakon cable
- 2x 8” PRO-X8M Mid-Range Speakers
- 2x 3.78” PRO-TWX2 Bullet Tweeters
- RMS Power: 550W Mid / 240W Tweeter
- Enclosure Type: Ported
- Speakon terminal + 12ft OFC 4-conductor Speakon cable
- FRP-1.2K4 included
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 8000W RMS @ 1 Ohm – Full-Range Monoblock Power
- Compact design with Smart Cooling and LED Clipping Indicator
- Variable Low-Pass & Subsonic Filters (10Hz–2KHz & 10Hz–80Hz)
- 12dB Bass Boost @ 50Hz for maximum low-end punch
- 0GA terminals & Tiffany RCA inputs
- Tested with Audio Precision equipment for real-world durability
- 4x6" 2-Way Coaxial
- MAX Power: 260 Watts
- RMS Power: 60 Watts
- Impedance: 3-Ohm
- Barium & Neodymium Magnets
- Pair ~ 87dB


































































































































































