If you want your style to match your output, RGB speaker rings are one of the easiest ways to take your sound system to the next level. Of all speaker rings available, one series installs the fastest, holds the tightest, and glows up any soundstage immediately. In this guide, we’re customizing DS18’s LED speaker rings to fit your specific audio setup.
What Is DS18’s LRING?
DS18’s LRING is an RGB LED speaker ring designed to bring your sound to life with one slick upgrade. Available in multiple sizes, this ring adds a glowing halo of color around your speakers.
Why LRINGs are a Must-Have:
· Easy Glow-Up: Add professional-style lighting with a quick, no-hassle install.
· Water-Resistant Design: Built for marine and powersports use with a foam seal that blocks out moisture.
· Universal Fit: Works with 6.5”, 6x9”, 8”, 10”, 12”, and 15” speakers – just choose your size.
· High Durability: Tough materials resist UV rays, vibrations, and rough terrain.
· Pre-Drilled For Speed: Factory holes line up with most speakers basket. For custom fits, just drill and go.
Preparing for Installation
Before starting your installation, complete this pre-flight checklist:
- Ensure your vehicle/boat battery is disconnected
- Test all LEDs before installation
- Plan your wire routing path
- Identify your power source (existing RGB controller or new installation)
- Download the DS18 app if using Bluetooth control
Before diving into the installation process, it’s essential to gather the necessary tools and materials.
Tools Required
- Your speaker and mounting hardware
- Drill with a fine plastic-compatible bit (⅛” or smaller recommended)
- Masking tape (optional, for marking)
- Small screwdriver
Choosing the Right Location
Select a suitable location for your speakers, considering factors such as visibility, accessibility, and exposure to elements if used in outdoor settings. Proper placement will effect both sound quality and visual impact.
Step-by-Step Guide to Installing RGB Speaker Rings
Installing RGB speaker rings like DS18’s LRING8 can be a straightforward process if you follow these steps carefully.
- Step 1: Test Fit the Ring
Begin by placing the LRING over your speaker to check for alignment. This initial test will help you determine if the pre-drilled holes match your speaker’s mounting points.
- Step 2: Mark New Hole Positions
If the factory-drilled holes do not align, use your speaker as a template. Align it with the LRING and mark where new holes should be drilled. Ensure that the markings are centered for a balanced look.
- Step 3: Drill Carefully
Using a small drill bit, create new holes at the marked positions. It’s crucial to drill slowly to avoid damaging the plastic or the LED strip underneath. A pro tip is to drill at low RPMs and only go deep enough to seat the screws without breaking through completely.
- Step 4: Mount and Seal
Once the new holes are drilled, mount your speaker using the custom hole layout. The foam and gasket system should still provide a snug, water-resistant seal, ensuring optimal performance.
Customizing Your RGB Lighting
One of the most exciting aspects of using RGB speaker rings is the ability to customize the lighting effects. With the right controller, you can create stunning light shows that sync with your music.
Using a RGB Controller
To take full advantage of your RGB speaker rings, consider investing in a compatible RGB controller. DS18's LED-BTC or LC-RGB controllers allows you to:
· Sync Colors: Match the lighting to your music for an immersive experience.
· Create Patterns: Choose from various lighting patterns, including flashing, fading, and static colors.
· Control Remotely: Many controllers offer remote access, allowing you to adjust settings without leaving your seat.
Troubleshooting Common Issues
Even with careful installation, you may encounter some common issues. Here’s how to address them:
Misalignment of Holes
If the holes do not align after drilling, double-check your measurements and adjust as necessary. It may be helpful to use a larger drill bit to create a bit of wiggle room for the screws.
Flickering Lights
If your RGB lights flicker, ensure that all connections are secure. Check the wiring and connections to the controller, as loose connections can lead to inconsistent performance.
Glow Up Your Soundstage
Customizing your audio setup with RGB speaker rings can significantly enhance both the visual and auditory experience. With the right tools and techniques, you can create a stunning installation that reflects your personal style and meets your audio needs.
Get Started Today!
Ready to make your system look as good as it sounds? Order your LRING and start customizing your audio experience today! With vibrant lighting, you’ll be well on your way to creating a setup that represents you!
For more tips and tricks on making the best system you can, make sure you bookmark the DS18 blog!
Follow us on Instagram / Facebook / TikTok / Twitter for more from the LOUDEST Team in Audio!
