Square ANL Fuse Holder
With some limitations - subject to verification and order volume
- Square Fuse Holder
- Accepts ANL Fuses
- Connects to 1/0 - 4 GA Power Wire
- Nickel Plated Contacts
- Heat Resistant Base and Cover
Have a Question? Ask a Specialist 305-928-8734 / Live Chat
FAST FREE SHIPPING
30-DAY RETURNS
2 YEAR WARRANTY
SECURE PAYMENT
KEY FEATURES
TECHNICAL DATA
Product Overview
DS18 FHSANL
Square ANL Fuse Holder For Car Amplifiers
Designed and engineered in the USA, the FHSANL is built to deliver the ultimate music experience.
Its solid construction ensures durability and conductivity, while the clear protective cover keeps it safe from any damage. With a heat-resistant base and cover, it can withstand even the most demanding conditions.
Installing this fuse holder is a breeze, allowing for easy multi-use combinations. Nickel plated and compatible with 0/4 GA square fuses, this DS18 fuse holder is a must-have for any car amplifier setup.
Related products
WE LIKE IT LOUD
The DS18 team is a staple in the car audio community and attends event & shows worldwide To support its teams mebers and the Audio Community.
Share your install with us by posting on social media and tagging #DS18
Let customers speak for us
I’m in love with these tweeters. They are great, loud, and so clear. I’m happy with my purchase and I will buy from DS18 again
7" Touchscreen Mechless Double-DIN Headunit with Bluetooth, USB, Mirror Link And Car play
These DS-18 tweeters deliver a vast improvement in overall sound quality over the factory tweeters, even when used with the factory front 6x9’s and rear 6.5” speakers in my ‘06 Toyota Tacoma (non JBL). They open up the top end so much that equalizer can dial in much more treble/high end. The resulting vocals and hi-end are much cleaner than the stock tweeters, which allows stronger more treble to be dialed in. This also can be balanced with slightly more mid-range and bass. The overall sound is much better. I plan to replace those remaining stock speakers but am very very pleased with the performance of just these DS-18 tweeters.
TX1 2" PEI Dome Ferrite Tweeter 0.5" VC 200 Watts
I now have the full sound system in Jeep.
DS sound bar
Ds speakers in front dash
In back 2 side panel ds 12in subs
In back 2 downfire DS 13 in subs
2 8in marine speakers
2 6 in marine speakers
All with RGB
Unreal system
24" Marine Amplified with Bluetooth Sound Bar Speaker System 6 Speakers 600 Watts
Paired them with 4 pro loudspeakers and it sounds amazing even without and amp highs are very clear
DS18 RE-16GA-500 16-GA Ultra Flex Primary Remote Wire 500 Feet
These are precisely what I was looking for to mount a set of DS18 6.5 speakers to the side panels.
Really woke my system up and took some stress off my worrying about ruining my other amp
LOVE THE SPEAKER & ITS REALLY LOUD. THE PROBLEM I HAVE IS THAT THE AMP ON BACK OF SPEAKER BOX GETS SO HOT U CAN LAY IT FLAT ON GROUND H ACTUALLY USE IT AS AN INDUCTION COOKING STOVE. IM BEING SO SERIOUS. PLEZ WATCH KIDS AROUND THIS UNIT IF U PURCHASE 1. IT WILL CAUSE SERIOUS BURNS & AN EMERGENCY ROOM TRIP & A BILL MUCH HIGHER THAN U PAY FOR THIS SPEAKER.
If you are looking for a machine to drive them competition subs? Start here first! Don't put these on Radio Shack speakers
Overall the speakers are over what was expecting sounds very loud keep in mind I used an external amp probably the only complain is a little the quality of the sound but those speakers are much more expensive
Bought 4 of the pro bullet loud speakers to upgrade the factory speakers in my 02 Audi a4 revived the speakers within a week even with a holiday weekend in between. Install was easy with a little modification of the old speaker housing it fit perfect. Also was able to pull the casing off of the 2in pei dome tweeter and slide it right where the factory tweeter went with no modifications and it stays perfect for a clean factory look all around. The sq is very impressive and almost twice as loud as my factory system. Note all of these speakers are just run off the head unit no amp yet and they are still amazing, looking at getting the 300w 4 channel amp sold by ds18 to finish it off
I’ll have to say, either your video doesn’t do it justice or they just sound horrible.
We are loading your cart...