2" FULL SIZE THROAT TITANIUM COMPRESSION DRIVER WITH SPACER AND SHORT HORN - KIT
PRO-DKH1X
Regular price $94.95/
Have a Question? Ask a Specialist
305-928-8734 Live Chat
In-House Experts.
We Know Our Products.
We Know Our Products.
Fast Free Shipping
On Orders Over $200
On Orders Over $200
Easy Returns
Open an RMA with our Specialist
Open an RMA with our Specialist
Warranty
1-Year Manufacturer Warranty
1-Year Manufacturer Warranty
Everyone is looking for louder horns and what they can do to tweak them. We make that easy for you with no guesswork with the DKH1X. This full size driver includes the DS18 DKH1 redesigned to be louder with the included DB spacer to increase the drivers overall sensitivity. Plus our newly redesigned shorty throat so you you only need 7.9 inches depth to mount these ear ripping drivers. The new throat is aluminum with brilliantly brushed DS18 logos and made for maximum directional efficiency. With an AES power handling of 160w and peak at 640w you will be sure to draw everyone's attention to your audio!
- DS18 Driver spacer increases the sensitivity decibel level significantly for the loudest response.
- Aluminum full size throat with db sensitivity spacer
- DKH1 Driver with an AES rating of 160 watts and peak of 640w for super loud and vibrant highs with a Titanium 8 ohm voice coil.
- 5.7 inch mounting depth and 6 inches total mounting depth so you don't need a large amount of mounting depth like other traditional driver and throat combinations.
Throat Diameter | 2"/50.8mm |
Installation Type | Bolt-on |
Nominal Impedance | 8 OHMS |
Program Power Handling | 320W |
Peak Power Handling | 640W |
AES Power Handling | 160W |
Sensitivity | 115dB |
Frequency Response | 630Hz-20KHz |
Recommended HI Pass Crossover | 900 Hz |
Motor | |
Voice Coil Diameter | 2.03"/51mm |
Voice Coil Former Material | Kapton |
Winding Material | CCA |
Diaphragm Material | Titanium |
Magnet Material | Ferrite |
Magnet Weight | 35oz |
Measurements | |
Overall Diameter | 7"/180mm |
Overall Depth | 8.3"/211mm |
Bolt Pattern/Type | 5.5mm hole-6.3"/161 mm Diameter |
Mounting Depth | 7.9"/201.5mm |
Mounting Hole Diameter | 5.7"/145mmm |